ADSB Receiver Pro

ADSB Receiver Pro


This app enables your device to display live ADSB data (1090ES) from surrounding airborne aircraft. All you need is a supported USB dongle and an OTG cable, both available from various sources on the internet for less than $20.-.

** Please note: YOU NEED ADDITIONAL HARDWARE TO USE THIS APP

Visit http://hiz.ch/index.php/home/adsb-receiver for more details!

Use this app to show live air traffic in Avare! All data received will be made available automatically, once Avare has been detected - no configuration required. Download Avare here:
http://hiz.ch/fwd/ps.Avare.html



USAGE

Attach a supported USB dongle to your Android device using an OnTheGo (OTG) cable. (Make sure your device supports OTG!) This app will automatically start once a device has been detected. Answer `yes` if you are asked to auto-open the app, it will immediately try to receive ADSB data. You should see packages flowing in quickly, depending on your location.



HARDWARE

List of supported tuners:

• Rafael Micro R820T (recommended)
• Rafael Micro R820T2 (recommended)
• Elonics E4000
• Fitipower FC0013 (low performance)

FC0013 is supported, but often has limits close to 1090 MHz, which can reduce the performance to receive ADSB data.

Example dongles:

NooElec NESDR Nano (R820T) (recommended - good antenna!)
http://www.nooelec.com/store/computer-peripherals/nesdr-nano-rtl2832-r820t.html

NooElec NESDR Mini 2 (R820T2)
http://www.nooelec.com/store/computer-peripherals/usb-ota-receivers/dvb-t-receivers/nesdr-mini2-rtl2832u-r820t2.html

NooElec NESDR XTR (E4000)
http://www.nooelec.com/store/computer-peripherals/usb-ota-receivers/dvb-t-receivers/nesdr-xtr-rtl2832u-e4000.html

Example OTG cables:

OTG plus charging, requires power source
Micro USB Host OTG Y-Cable with Micro USB Power Charging for Samsung Phones
http://shop.valarm.net/products/micro-usb-host-otg-y-cable-with-micro-usb-power-for-samsung

OTG only
Micro USB to USB2.0 A Female OTG Data Host Cable for Nexus 7, Galaxy S3/S4
http://hiz.ch/fwd/ebay_OTG.html



AUTHOR

HIZ LLC, Michael Hammer
Copyright (C) 2014-2015, all rights reserved



DISCLAIMER

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.



MAP IMPLEMENTATION

• It is not guaranteed that this app will always use a `Google Map`. The map implementation may change at any time.
• This app will not collect any personal data.
• Google Terms of Service: http://developers.google.com/terms/
• Google Privacy Policy: http://www.google.com/intl/en/policies/privacy/

Recent changes:
-Data view is now a table
-Will show aircraft categories/specific icons
-Does no longer require the Avare IO helper app, all data will be sent to Avare directly
Add to list
$2.49
86
4.3
User ratings
28
Installs
1,000+
Concerns
1
File size
1286 kb
Screenshots
Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro Screenshot of ADSB Receiver Pro
About ADSB Receiver Pro
This app enables your device to display live ADSB data (1090ES) from surrounding airborne aircraft. All you need is a supported USB dongle and an OTG cable, both available from various sources on the internet for less than $20.-.

** Please note: YOU NEED ADDITIONAL HARDWARE TO USE THIS APP

Visit http://hiz.ch/index.php/home/adsb-receiver for more details!

Use this app to show live air traffic in Avare! All data received will be made available automatically, once Avare has been detected - no configuration required. Download Avare here:
http://hiz.ch/fwd/ps.Avare.html



USAGE

Attach a supported USB dongle to your Android device using an OnTheGo (OTG) cable. (Make sure your device supports OTG!) This app will automatically start once a device has been detected. Answer `yes` if you are asked to auto-open the app, it will immediately try to receive ADSB data. You should see packages flowing in quickly, depending on your location.



HARDWARE

List of supported tuners:

• Rafael Micro R820T (recommended)
• Rafael Micro R820T2 (recommended)
• Elonics E4000
• Fitipower FC0013 (low performance)

FC0013 is supported, but often has limits close to 1090 MHz, which can reduce the performance to receive ADSB data.

Example dongles:

NooElec NESDR Nano (R820T) (recommended - good antenna!)
http://www.nooelec.com/store/computer-peripherals/nesdr-nano-rtl2832-r820t.html

NooElec NESDR Mini 2 (R820T2)
http://www.nooelec.com/store/computer-peripherals/usb-ota-receivers/dvb-t-receivers/nesdr-mini2-rtl2832u-r820t2.html

NooElec NESDR XTR (E4000)
http://www.nooelec.com/store/computer-peripherals/usb-ota-receivers/dvb-t-receivers/nesdr-xtr-rtl2832u-e4000.html

Example OTG cables:

OTG plus charging, requires power source
Micro USB Host OTG Y-Cable with Micro USB Power Charging for Samsung Phones
http://shop.valarm.net/products/micro-usb-host-otg-y-cable-with-micro-usb-power-for-samsung

OTG only
Micro USB to USB2.0 A Female OTG Data Host Cable for Nexus 7, Galaxy S3/S4
http://hiz.ch/fwd/ebay_OTG.html



AUTHOR

HIZ LLC, Michael Hammer
Copyright (C) 2014-2015, all rights reserved



DISCLAIMER

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.



MAP IMPLEMENTATION

• It is not guaranteed that this app will always use a `Google Map`. The map implementation may change at any time.
• This app will not collect any personal data.
• Google Terms of Service: http://developers.google.com/terms/
• Google Privacy Policy: http://www.google.com/intl/en/policies/privacy/

Recent changes:
-Data view is now a table
-Will show aircraft categories/specific icons
-Does no longer require the Avare IO helper app, all data will be sent to Avare directly

Android Market Comments
A Google User
May 8, 2015
Very good! ...but trial is newer than this pro version?
A Google User
Mar 31, 2015
Tom Works great - Thanks!
A Google User
Feb 18, 2015
Crashes App crashes when I select map. It tries to open but quickly closes on my Samsung Galaxy S5.
A Google User
Jan 31, 2015
Good Could you please add the ability to use a remote dongle.
A Google User
Jan 23, 2015
Planeplotter it ain't. It isn't that sensitive but it doesn't have rtl1090 or similar feeding data to it so I didn't expect much and am happy to have ads-b on my devices.
Version 1000000
Version 1000000