DashCommand (OBD ELM App)

DashCommand (OBD ELM App)


DashCommand is an app for your car. It turns your Android phone or tablet into an advanced display for your engine data.

Want to know why the check engine light keeps going on? Check it with DashCommand.

Want to know what your horsepower, torque, or acceleration is, in real time? Display it with DashCommand.

Want to monitor and improve your gas mileage or fuel consumption as you drive? Do it with DashCommand.

Ever wished you had your own customizable gauges, showing only the data you were interested in? DashCommand can help.

NOTE: The free version of DashCommand is evaluation mode only. Full functionality requires an in-app purchase through Google Play.

--- SEMA Show 1st runner-up for best mobile electronics product.
--- Four time SEMA Global Media Award winner!

DISCLAIMER: DashCommand requires a compatible third party hardware interface, purchased separately, to communicate with the vehicle.

DashCommand supports all OBD-II and EOBD compliant vehicles sold worldwide. Please verify that your vehicle is OBD-II/EOBD compliant before purchasing!

Compatible with Bluetooth ELM327 OBD-II hardware. For suggested hardware see : http://palmerperformance.com/hardware

-----------------------------------

Get the benefit of multiple gauges without the overwhelming clutter and the expense!

(Note: Not all OBD-II compliant vehicles will have support for all of these parameters)

Performance gauges:
- engine speed
- corrected vehicle speed
- open/closed loop
- boost/vacuum combo gauge
- acceleration (and braking)
- torque

Fuel economy gauges:
- inst. fuel economy
- avg fuel economy
- avg fuel economy over 3 time periods
- distance to empty
- time to empty
- fuel level %
- fuel remaining in tank
- fuel flow rate gauge

Engine gauges:
- timing (spark advance)
- engine coolant temp.
- intake air temp.
- ambient air temp.
- manifold absolute pressure
- mass air flow
- fuel trims, short and long term
- percent engine load
- catalyst temp.
- fuel pressure
- lambda gauge
- air/fuel ratio

DashCommand also contains a sophisticated trip computer that maintains stats for up to 5 trips.
- distance travelled
- fuel consumed
- avg fuel economy
- fuel cost
- elapsed time
- drive time
- average carbon dioxide emission rate
- total carbon dioxide emission
- start date & time
- number of fillups
- avg fuel flow rate
- avg driving speed
- avg trip speed
- avg boost/vacuum
- avg engine speed
- max acceleration
- max engine power and torque at wheels
- number of stops
- max fuel flow rate
- max speed
- idle time
- max boost/vacuum
- max engine speed
- max braking acceleration
- max engine torque
- % distance travelled while not in gear
- % distance travelled in each gear
- % distance travelled in non-optimal gear
- % time spent while not in gear
- % time spent in each gear
- % time spent while in a non-optimal gear

Emissions Testing:
- Read and clear diagnostic trouble codes
- IM Readiness status


Additional Features:

- Professional skidpad showing lateral and accel/braking Gs with min/max indicators
- Race track visually maps out your location, acceleration and braking as you drive laps around the track allows you to visually analyze different race track laps to see how acceleration and braking changed from lap to lap thus helping you to improve your lap times on your next outing.
- Inclinometer shows rolling angle and vehicle pitch for off-roading.
- Full support for OBD-II diagnostics, find out why your check-engine light is on and clear diagnostic trouble codes (DTCs)
- Data logging, record and playback log files showing OBD-II and acceleration data

Also compatible with the Pioneer AppRadio 2

Manufacturer-specific data is available for select vehicles, through In-App purchase.

-----------------------------------

Visit the DashCommand product page for more info:
http://www.dashcommand.com

Recent changes:
- Transmission PIDs added for Ford 2009 F-150 and Super Duty Vehicles.

- Adds a reset button to the Data Grid that will allow a user to reset min/max/avg values.

- Fixes a crash at startup on x86 devices.

- Fixes a crash when downloading a dashboard.
Add to list
Free
82
4.1
User ratings
6447
Installs
500,000+
Concerns
2
File size
21956 kb
Screenshots
Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App) Screenshot of DashCommand (OBD ELM App)
About DashCommand (OBD ELM App)
DashCommand is an app for your car. It turns your Android phone or tablet into an advanced display for your engine data.

Want to know why the check engine light keeps going on? Check it with DashCommand.

Want to know what your horsepower, torque, or acceleration is, in real time? Display it with DashCommand.

Want to monitor and improve your gas mileage or fuel consumption as you drive? Do it with DashCommand.

Ever wished you had your own customizable gauges, showing only the data you were interested in? DashCommand can help.

NOTE: The free version of DashCommand is evaluation mode only. Full functionality requires an in-app purchase through Google Play.

--- SEMA Show 1st runner-up for best mobile electronics product.
--- Four time SEMA Global Media Award winner!

DISCLAIMER: DashCommand requires a compatible third party hardware interface, purchased separately, to communicate with the vehicle.

DashCommand supports all OBD-II and EOBD compliant vehicles sold worldwide. Please verify that your vehicle is OBD-II/EOBD compliant before purchasing!

Compatible with Bluetooth ELM327 OBD-II hardware. For suggested hardware see : http://palmerperformance.com/hardware

-----------------------------------

Get the benefit of multiple gauges without the overwhelming clutter and the expense!

(Note: Not all OBD-II compliant vehicles will have support for all of these parameters)

Performance gauges:
- engine speed
- corrected vehicle speed
- open/closed loop
- boost/vacuum combo gauge
- acceleration (and braking)
- torque

Fuel economy gauges:
- inst. fuel economy
- avg fuel economy
- avg fuel economy over 3 time periods
- distance to empty
- time to empty
- fuel level %
- fuel remaining in tank
- fuel flow rate gauge

Engine gauges:
- timing (spark advance)
- engine coolant temp.
- intake air temp.
- ambient air temp.
- manifold absolute pressure
- mass air flow
- fuel trims, short and long term
- percent engine load
- catalyst temp.
- fuel pressure
- lambda gauge
- air/fuel ratio

DashCommand also contains a sophisticated trip computer that maintains stats for up to 5 trips.
- distance travelled
- fuel consumed
- avg fuel economy
- fuel cost
- elapsed time
- drive time
- average carbon dioxide emission rate
- total carbon dioxide emission
- start date & time
- number of fillups
- avg fuel flow rate
- avg driving speed
- avg trip speed
- avg boost/vacuum
- avg engine speed
- max acceleration
- max engine power and torque at wheels
- number of stops
- max fuel flow rate
- max speed
- idle time
- max boost/vacuum
- max engine speed
- max braking acceleration
- max engine torque
- % distance travelled while not in gear
- % distance travelled in each gear
- % distance travelled in non-optimal gear
- % time spent while not in gear
- % time spent in each gear
- % time spent while in a non-optimal gear

Emissions Testing:
- Read and clear diagnostic trouble codes
- IM Readiness status


Additional Features:

- Professional skidpad showing lateral and accel/braking Gs with min/max indicators
- Race track visually maps out your location, acceleration and braking as you drive laps around the track allows you to visually analyze different race track laps to see how acceleration and braking changed from lap to lap thus helping you to improve your lap times on your next outing.
- Inclinometer shows rolling angle and vehicle pitch for off-roading.
- Full support for OBD-II diagnostics, find out why your check-engine light is on and clear diagnostic trouble codes (DTCs)
- Data logging, record and playback log files showing OBD-II and acceleration data

Also compatible with the Pioneer AppRadio 2

Manufacturer-specific data is available for select vehicles, through In-App purchase.

-----------------------------------

Visit the DashCommand product page for more info:
http://www.dashcommand.com

Recent changes:
- Transmission PIDs added for Ford 2009 F-150 and Super Duty Vehicles.

- Adds a reset button to the Data Grid that will allow a user to reset min/max/avg values.

- Fixes a crash at startup on x86 devices.

- Fixes a crash when downloading a dashboard.

Android Market Comments
A Google User
Saturday 9:47 PM
Ayup So far so good ..still could be better x
A Google User
Saturday 5:48 PM
Cheap In the demo version, codes can't be cleared. Only intermittent contact with OBD. Login to buy full version not working. Uninstalled.
A Google User
4 days ago
i can not get this app to work on a droid nexus or lap top and had to uninstall it keeps freezing up . no support yet after 2 emails .
A Google User
5 days ago
The most accurate OBD2 reader in the play store.... at least so far...
A Google User
5 days ago
works great. would like to see plugins
Version 1000000
Version 1000000