Engineering Survey Calculator contains 65 Calculators and Converters, that can quickly and easily calculate and convert different Surveying and Civil Engineering parameters. Automatic & Accurate Calculations and Conversions with every Unit and Value Changes. Available in Imperial and Metric Units. Most Comprehensive Engineering Survey Calculator.

*** Available in Metric and Imperial Units ***

Engineering Survey Calculator contains following 33 Calculators:

• Standard Deviation (Series of Observations)

• Probable Error (Single Observation)

• Probable Error (Combined Effects of Accidental Errors)

• Error of the Mean (Based on Combined Effects of Accidental Errors)

• Error of the Mean (Based on Specified Error of a Single Measurement)

• Specified Error of a Single Measurement

• Probable Error of the Mean

• Temperature Correction

• Measurement Correction on a Slope

• Tension Correction to Measured Length

• Sag Correction to Measured Length

• Horizontal Distance (Slope Measurements)

• Slope Correction (Slopes of 10% or less)

• Slope Correction (Slopes greater than 10%)

• Correction due to Incorrect Tape Length

• Correction due to Nonstandard Tension

• Sag Correction (Between Points of Support)

• Departure from a Level Surface

• Displacement (Horizontal Sights)

• Combined Effect of Refraction and Curvature of Earth

• Quantities of Material to be Excavated/Filled

• Relative Accuracy required between directly connected Bench Marks (First Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (First Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Third Order)

• Horizontal Distance between the Instrument and the Rod (Stadia Surveying)

• Vertical Distance between the Instrument and the Rod (Stadia Surveying)

• Stadia Distance (From Instrument Spindle to Rod - Horizontal Sights)

• Stadia Constant

• Photo Scale

• Photo Scale (Using Focal Length)

• Map Scale

Engineering Survey Calculator contains following 32 Converters:

• Acceleration

• Angle

• Area

• Density

• Energy/Work

• Flow Rate (Mass)

• Flow Rate (Volume)

• Fluid

• Force

• Frequency

• Hardness

• Length

• Mass

• Metric Weight

• Metrology

• Moment of Force

• Moment of Inertia

• Prefixes

• Pressure

• Radiation

• Specific Heat Capacity

• Specific Volume

• Temperature

• Thermal Conductivity

• Thermal Expansion

• Time

• Torque

• Velocity

• Viscosity (Dynamic)

• Viscosity (Oil & Water)

• Viscosity (Kinematic)

• Volume

Key Features:

• Complete coverage of calculators and converters in Surveying and Civil Engineering Parameters.

• Automatic Calculation & Conversion of the Output with respect to changes in the Input/Options/Units.

• Formulas are provided for each calculator.

• Values of Higher Order can also be calculated.

• Extremely Accurate Calculations and Conversions.

• Professionally and Newly designed user-interface that speeds up Data Entry, Easy Viewing and Calculation Speed.

Most Comprehensive Engineering Survey Calculator

*** Available in Metric and Imperial Units ***

Engineering Survey Calculator contains following 33 Calculators:

• Standard Deviation (Series of Observations)

• Probable Error (Single Observation)

• Probable Error (Combined Effects of Accidental Errors)

• Error of the Mean (Based on Combined Effects of Accidental Errors)

• Error of the Mean (Based on Specified Error of a Single Measurement)

• Specified Error of a Single Measurement

• Probable Error of the Mean

• Temperature Correction

• Measurement Correction on a Slope

• Tension Correction to Measured Length

• Sag Correction to Measured Length

• Horizontal Distance (Slope Measurements)

• Slope Correction (Slopes of 10% or less)

• Slope Correction (Slopes greater than 10%)

• Correction due to Incorrect Tape Length

• Correction due to Nonstandard Tension

• Sag Correction (Between Points of Support)

• Departure from a Level Surface

• Displacement (Horizontal Sights)

• Combined Effect of Refraction and Curvature of Earth

• Quantities of Material to be Excavated/Filled

• Relative Accuracy required between directly connected Bench Marks (First Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (First Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Third Order)

• Horizontal Distance between the Instrument and the Rod (Stadia Surveying)

• Vertical Distance between the Instrument and the Rod (Stadia Surveying)

• Stadia Distance (From Instrument Spindle to Rod - Horizontal Sights)

• Stadia Constant

• Photo Scale

• Photo Scale (Using Focal Length)

• Map Scale

Engineering Survey Calculator contains following 32 Converters:

• Acceleration

• Angle

• Area

• Density

• Energy/Work

• Flow Rate (Mass)

• Flow Rate (Volume)

• Fluid

• Force

• Frequency

• Hardness

• Length

• Mass

• Metric Weight

• Metrology

• Moment of Force

• Moment of Inertia

• Prefixes

• Pressure

• Radiation

• Specific Heat Capacity

• Specific Volume

• Temperature

• Thermal Conductivity

• Thermal Expansion

• Time

• Torque

• Velocity

• Viscosity (Dynamic)

• Viscosity (Oil & Water)

• Viscosity (Kinematic)

• Volume

Key Features:

• Complete coverage of calculators and converters in Surveying and Civil Engineering Parameters.

• Automatic Calculation & Conversion of the Output with respect to changes in the Input/Options/Units.

• Formulas are provided for each calculator.

• Values of Higher Order can also be calculated.

• Extremely Accurate Calculations and Conversions.

• Professionally and Newly designed user-interface that speeds up Data Entry, Easy Viewing and Calculation Speed.

Most Comprehensive Engineering Survey Calculator

Screenshots

About Engineering Survey Tablet

Engineering Survey Calculator contains 65 Calculators and Converters, that can quickly and easily calculate and convert different Surveying and Civil Engineering parameters. Automatic & Accurate Calculations and Conversions with every Unit and Value Changes. Available in Imperial and Metric Units. Most Comprehensive Engineering Survey Calculator.

*** Available in Metric and Imperial Units ***

Engineering Survey Calculator contains following 33 Calculators:

• Standard Deviation (Series of Observations)

• Probable Error (Single Observation)

• Probable Error (Combined Effects of Accidental Errors)

• Error of the Mean (Based on Combined Effects of Accidental Errors)

• Error of the Mean (Based on Specified Error of a Single Measurement)

• Specified Error of a Single Measurement

• Probable Error of the Mean

• Temperature Correction

• Measurement Correction on a Slope

• Tension Correction to Measured Length

• Sag Correction to Measured Length

• Horizontal Distance (Slope Measurements)

• Slope Correction (Slopes of 10% or less)

• Slope Correction (Slopes greater than 10%)

• Correction due to Incorrect Tape Length

• Correction due to Nonstandard Tension

• Sag Correction (Between Points of Support)

• Departure from a Level Surface

• Displacement (Horizontal Sights)

• Combined Effect of Refraction and Curvature of Earth

• Quantities of Material to be Excavated/Filled

• Relative Accuracy required between directly connected Bench Marks (First Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (First Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Third Order)

• Horizontal Distance between the Instrument and the Rod (Stadia Surveying)

• Vertical Distance between the Instrument and the Rod (Stadia Surveying)

• Stadia Distance (From Instrument Spindle to Rod - Horizontal Sights)

• Stadia Constant

• Photo Scale

• Photo Scale (Using Focal Length)

• Map Scale

Engineering Survey Calculator contains following 32 Converters:

• Acceleration

• Angle

• Area

• Density

• Energy/Work

• Flow Rate (Mass)

• Flow Rate (Volume)

• Fluid

• Force

• Frequency

• Hardness

• Length

• Mass

• Metric Weight

• Metrology

• Moment of Force

• Moment of Inertia

• Prefixes

• Pressure

• Radiation

• Specific Heat Capacity

• Specific Volume

• Temperature

• Thermal Conductivity

• Thermal Expansion

• Time

• Torque

• Velocity

• Viscosity (Dynamic)

• Viscosity (Oil & Water)

• Viscosity (Kinematic)

• Volume

Key Features:

• Complete coverage of calculators and converters in Surveying and Civil Engineering Parameters.

• Automatic Calculation & Conversion of the Output with respect to changes in the Input/Options/Units.

• Formulas are provided for each calculator.

• Values of Higher Order can also be calculated.

• Extremely Accurate Calculations and Conversions.

• Professionally and Newly designed user-interface that speeds up Data Entry, Easy Viewing and Calculation Speed.

Most Comprehensive Engineering Survey Calculator

*** Available in Metric and Imperial Units ***

Engineering Survey Calculator contains following 33 Calculators:

• Standard Deviation (Series of Observations)

• Probable Error (Single Observation)

• Probable Error (Combined Effects of Accidental Errors)

• Error of the Mean (Based on Combined Effects of Accidental Errors)

• Error of the Mean (Based on Specified Error of a Single Measurement)

• Specified Error of a Single Measurement

• Probable Error of the Mean

• Temperature Correction

• Measurement Correction on a Slope

• Tension Correction to Measured Length

• Sag Correction to Measured Length

• Horizontal Distance (Slope Measurements)

• Slope Correction (Slopes of 10% or less)

• Slope Correction (Slopes greater than 10%)

• Correction due to Incorrect Tape Length

• Correction due to Nonstandard Tension

• Sag Correction (Between Points of Support)

• Departure from a Level Surface

• Displacement (Horizontal Sights)

• Combined Effect of Refraction and Curvature of Earth

• Quantities of Material to be Excavated/Filled

• Relative Accuracy required between directly connected Bench Marks (First Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (First Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class I)

• Relative Accuracy required between directly connected Bench Marks (Second Order - Class II)

• Relative Accuracy required between directly connected Bench Marks (Third Order)

• Horizontal Distance between the Instrument and the Rod (Stadia Surveying)

• Vertical Distance between the Instrument and the Rod (Stadia Surveying)

• Stadia Distance (From Instrument Spindle to Rod - Horizontal Sights)

• Stadia Constant

• Photo Scale

• Photo Scale (Using Focal Length)

• Map Scale

Engineering Survey Calculator contains following 32 Converters:

• Acceleration

• Angle

• Area

• Density

• Energy/Work

• Flow Rate (Mass)

• Flow Rate (Volume)

• Fluid

• Force

• Frequency

• Hardness

• Length

• Mass

• Metric Weight

• Metrology

• Moment of Force

• Moment of Inertia

• Prefixes

• Pressure

• Radiation

• Specific Heat Capacity

• Specific Volume

• Temperature

• Thermal Conductivity

• Thermal Expansion

• Time

• Torque

• Velocity

• Viscosity (Dynamic)

• Viscosity (Oil & Water)

• Viscosity (Kinematic)

• Volume

Key Features:

• Complete coverage of calculators and converters in Surveying and Civil Engineering Parameters.

• Automatic Calculation & Conversion of the Output with respect to changes in the Input/Options/Units.

• Formulas are provided for each calculator.

• Values of Higher Order can also be calculated.

• Extremely Accurate Calculations and Conversions.

• Professionally and Newly designed user-interface that speeds up Data Entry, Easy Viewing and Calculation Speed.

Most Comprehensive Engineering Survey Calculator

Android Market Comments

No comments in the Android market yet