Gadmin for Webmin

Gadmin for Webmin


Get Gadmin and control all WEBMIN HOST and SERVER FARM’s within your network!

G(lobal)Admin is a smartphone controller for all of your Webmin Server hosts. Global Admin uses your WiFi (or even 3G) to scan your network and discover Webmin Hosts. Switch from Webmin’s Web-Interface to Global Admin and enjoy the easy of remoting your webmin hosts or server farm with your mobile android phone.

Working and tested with Webmin 1.580 to 1.600

*IMPORTANT!*
You MAY have to install a perl module at the host to fix an issue with webmin.

Perl module: "libxml-parser-perl"

Cmd line with aptitude: "apt-get install libxml-parser-perl"

*IMPORTANT*
Do not forgett to enable WI-FI

Gadmin Where To Start:
http://goo.gl/2NM51

Product Description:
http://goo.gl/26P1u

Full Version History:
http://goo.gl/yydey

Attention!
==========
Make sure that at Webmin -> Webmin Users -> *username* -> Permissions for all modules, you have "Can accept RPC calls" set to "Yes"!



WHY USE GADMIN:

★ ADDITIONAL WEBMIN MODULES will become available over time.
★ Global Admin for WEBMIN uses your Internet connection: 3G/EDGE or Wi-Fi when available.

System Requirements:
All you need is a android powered mobile phone with at least android 2.2 (Froyo) and some space to keep Gadmin. You need at least one WEBMIN Host you have access to (Webmin is a web-based interface for system administration, www.webmin.com)
---------------------------------------------------------
It would be nice to hear from you! Any feedback will be appreciated. Please send emails to [email protected]

You could also follow us on Google Plus:

Gadmin G+ Site
News and Tips to Gadmin
https://plus.google.com/103539438661094744860

BasicBeans G+ Site:
General Information
https://plus.google.com/117043381401341312093

---------------------------------------------------------

EULA:
https://docs.google.com/document/pub?id=1JxHNh8Q2wadNzeGBqxSoymSls5DMX4lo_oB4UHazxtE

HINTS
=====:

WLAN/3G

If you want to scan your network for Webmin host, you need to switch from 3G to WLAN (Wifi)

SSL
-----
If you use WEBMIN and SSL with an self signet certificate, you can enable “ignore SSL issues” at the preferences to tell gadmin to ignore certificate chain problems.

TIMEOUT’s:
----------------
You can set connection- and read timeout’s at the preferences.

The Connection Timeout tells gadmin, how long to wait for a connection to a WEBMIN Host. When connecting to a WEBMIN Host is impossible due to a timeout, just increase the timeout value for “Connection Timeout” at the preferences

When you face Input oder Read Timeout’s, after you are successful connected to a WEBMIN Host already, just increase the “Input Timeout” at the preferences.

Recent changes:
See full Version History at:
http://goo.gl/yydey

Version 1.3.8.1 Fixed issue wth port settings

Version 1.3.8 Runlevel
+Host Commander
Setting the systems runlevel. It is possible to set the system runlevel via the Host Commander tab (system commands)

Version 1.3.7,Host Status List,Preferences
+ Automated status updates (default on,5 seconds refresh)
+ Added some status information to Host Status List
+ Toogle on/off automated refresh to Host Status List
+ Set refresh rate of Host Status List
Add to list
$2.76
71
3.6
User ratings
9
Installs
100+
Concerns
0
File size
329 kb
Screenshots
Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin Screenshot of Gadmin for Webmin

About Gadmin for Webmin
Get Gadmin and control all WEBMIN HOST and SERVER FARM’s within your network!

G(lobal)Admin is a smartphone controller for all of your Webmin Server hosts. Global Admin uses your WiFi (or even 3G) to scan your network and discover Webmin Hosts. Switch from Webmin’s Web-Interface to Global Admin and enjoy the easy of remoting your webmin hosts or server farm with your mobile android phone.

Working and tested with Webmin 1.580 to 1.600

*IMPORTANT!*
You MAY have to install a perl module at the host to fix an issue with webmin.

Perl module: "libxml-parser-perl"

Cmd line with aptitude: "apt-get install libxml-parser-perl"

*IMPORTANT*
Do not forgett to enable WI-FI

Gadmin Where To Start:
http://goo.gl/2NM51

Product Description:
http://goo.gl/26P1u

Full Version History:
http://goo.gl/yydey

Attention!
==========
Make sure that at Webmin -> Webmin Users -> *username* -> Permissions for all modules, you have "Can accept RPC calls" set to "Yes"!



WHY USE GADMIN:

★ ADDITIONAL WEBMIN MODULES will become available over time.
★ Global Admin for WEBMIN uses your Internet connection: 3G/EDGE or Wi-Fi when available.

System Requirements:
All you need is a android powered mobile phone with at least android 2.2 (Froyo) and some space to keep Gadmin. You need at least one WEBMIN Host you have access to (Webmin is a web-based interface for system administration, www.webmin.com)
---------------------------------------------------------
It would be nice to hear from you! Any feedback will be appreciated. Please send emails to [email protected]

You could also follow us on Google Plus:

Gadmin G+ Site
News and Tips to Gadmin
https://plus.google.com/103539438661094744860

BasicBeans G+ Site:
General Information
https://plus.google.com/117043381401341312093

---------------------------------------------------------

EULA:
https://docs.google.com/document/pub?id=1JxHNh8Q2wadNzeGBqxSoymSls5DMX4lo_oB4UHazxtE

HINTS
=====:

WLAN/3G

If you want to scan your network for Webmin host, you need to switch from 3G to WLAN (Wifi)

SSL
-----
If you use WEBMIN and SSL with an self signet certificate, you can enable “ignore SSL issues” at the preferences to tell gadmin to ignore certificate chain problems.

TIMEOUT’s:
----------------
You can set connection- and read timeout’s at the preferences.

The Connection Timeout tells gadmin, how long to wait for a connection to a WEBMIN Host. When connecting to a WEBMIN Host is impossible due to a timeout, just increase the timeout value for “Connection Timeout” at the preferences

When you face Input oder Read Timeout’s, after you are successful connected to a WEBMIN Host already, just increase the “Input Timeout” at the preferences.

Recent changes:
See full Version History at:
http://goo.gl/yydey

Version 1.3.8.1 Fixed issue wth port settings

Version 1.3.8 Runlevel
+Host Commander
Setting the systems runlevel. It is possible to set the system runlevel via the Host Commander tab (system commands)

Version 1.3.7,Host Status List,Preferences
+ Automated status updates (default on,5 seconds refresh)
+ Added some status information to Host Status List
+ Toogle on/off automated refresh to Host Status List
+ Set refresh rate of Host Status List

Visit Website
User reviews of Gadmin for Webmin
Write the first review for this app!
Android Market Comments
A Google User
Jul 13, 2014
This is a nice try to transfer webmin experience on android.However there are a lot things to do...3 stars for now.They will grow over time though :)
A Google User
Jul 7, 2014
Excellent tool. Needs more options, its a great start.
A Google User
Jun 16, 2013
Excellent tool. Needs more options, its a great start.
A Google User
Jan 17, 2013
Great app!
A Google User
Dec 6, 2012
Great Job Dude Go coders go. This is why I love coders. Like the other cat more options but great start. Get the cluster control modules coded and this will be a weapon!