READ BEFORE DOWNLOAD: This application only works with the iBKS models with firmware version V2.0 or higher. Lower versions MAY NOT WORK with some devices.
iBKS Config Tool is an App which will allow you to scan and set up the iBeacon models iBKS101, iBKS102 and iBKS105 with firmware v2.0 and above manufactured by Accent Advanced Systems SLU company.
The available features on the app are:
- Scan all the available iBeacon devices around and view the device MAC address and the advertising packet UUID, major, minor battery level and RSSI.
- Connect to iBeacon devices in configuration mode, view and modify the following characteristics: UUID, major, minor, the measured cal power at 1 m., advertisings interval, TX power, password and battery byte control.
- App only available for devices with Bluetooth Smart LE v4.0 and Android 4.3 or newer.
- This app was specially designed to setup the iBeacon devices models iBKS101, iBKS102 and iBKS105 with firmware v2.0 and above manufactured by Accent Advanced Systems SLU. Lower firmware versions may not work with some devices.
NOTE: App tested and working on devices: Samsung Galaxy Note 3, Galaxy S3, Galaxy S4, Galaxy S4 Mini, Galaxy S5, Nexus 5, Nexus 7, Motorola Moto G y OnePlus One
Connection issues for firmware below v2.0 on: Nexus devices, Motorola and Sony Xperia devices limited by Android OS.
For more information visit our website at http://www.ibeacon.accent-systems.com/
- Now allows to insert URLs different than the shortened ones al long as it does not pass the permitted length.
- Fixed minor bugs