IP-Symcon Mobile (deprecated)

IP-Symcon Mobile (deprecated)


IP-Symcon Mobile is the mobile visualisation for the IP-Symcon automation software. It offers you a fast and comfortable way to monitor and control all the devices and equipment of your building. With your user-defined WebFronts you can command your equipment in real time or control individual states. Access is quick due to low data transmission no matter if you use it via your local network or a 3G remote access. The authentication by user name/password and an optionally available SSL encryption further provides a secure connection.

From a single interface, you can command all systems supported by IP-Symcon such as EIB/KNX, LCN, EnOcean, eq3 HomeMatic, Eaton Xcomfort, Z-Wave, M-Bus, ModBus (for instance WAGO SPS/Beckhoff SPS), different ALLNET devices and other systems. A complete list can be found here:
http://www.ip-symcon.de/produkt/hardware/

The functions at a glance:
- Fast access due to minimal data transmission
- User-defined WebFronts for ten different servers
- Authentication by user name and password
- Secure connection using SSL encryption
- All IP-Symcon compatible systems are supported
- Special variables are supported (TextBox, HTMLBox, HexColor)
- Display of media files configured with IP-Symcon (for instance webcam images)
- Send custom alarms/messages via Push Notifications (*)

For a list containing the differences from the normal WebFront, please click on our Documentation-link or on our Support-link. Please check these informations before you consider making an unfavourable feedback. Thank you!
http://www.ip-symcon.de/service/dokumentation/komponenten/visualisierungen/mobile-android/

Important:
This application requires installation of an IP-Symcon server system equipped with IP-Symcon Basic, IP-Symcon Professional or IP-Symcon Unlimited, version 2.4 #2000 or higher. Additionally, the corresponding hardware for your building automation has to be installed. All categories, variables and devices shown on the screenshots are examples taken from a sample project. You personal IP-Symcon Mobile App will be individually customized depending on the configuration of your IP-Symcon server system. Please also refer to the documentation concerning the IP-Symcon WebFront. (*) Sending Push Notifications requires at least IP-Symcon 2.7 #2598, an internet connection and a valid IP-Symcon subscription.

Recent changes:
-Fix: Fixed a rare issue where you would receive a "Not all field" error

-New: Support for Push Notifications (*)
-Fix: Delay when using HTML-Boxes multiple times

(*) Sending Push Notifications requires at least IP-Symcon 2.7 #2598, an internet connection and a valid IP-Symcon subscription.
Add to list
Free
87
4.4
User ratings
39
Installs
1,000+
Concerns
1
File size
391 kb
Screenshots
Screenshot of IP-Symcon Mobile (deprecated) Screenshot of IP-Symcon Mobile (deprecated) Screenshot of IP-Symcon Mobile (deprecated) Screenshot of IP-Symcon Mobile (deprecated) Screenshot of IP-Symcon Mobile (deprecated)
About IP-Symcon Mobile (deprecated)
IP-Symcon Mobile is the mobile visualisation for the IP-Symcon automation software. It offers you a fast and comfortable way to monitor and control all the devices and equipment of your building. With your user-defined WebFronts you can command your equipment in real time or control individual states. Access is quick due to low data transmission no matter if you use it via your local network or a 3G remote access. The authentication by user name/password and an optionally available SSL encryption further provides a secure connection.

From a single interface, you can command all systems supported by IP-Symcon such as EIB/KNX, LCN, EnOcean, eq3 HomeMatic, Eaton Xcomfort, Z-Wave, M-Bus, ModBus (for instance WAGO SPS/Beckhoff SPS), different ALLNET devices and other systems. A complete list can be found here:
http://www.ip-symcon.de/produkt/hardware/

The functions at a glance:
- Fast access due to minimal data transmission
- User-defined WebFronts for ten different servers
- Authentication by user name and password
- Secure connection using SSL encryption
- All IP-Symcon compatible systems are supported
- Special variables are supported (TextBox, HTMLBox, HexColor)
- Display of media files configured with IP-Symcon (for instance webcam images)
- Send custom alarms/messages via Push Notifications (*)

For a list containing the differences from the normal WebFront, please click on our Documentation-link or on our Support-link. Please check these informations before you consider making an unfavourable feedback. Thank you!
http://www.ip-symcon.de/service/dokumentation/komponenten/visualisierungen/mobile-android/

Important:
This application requires installation of an IP-Symcon server system equipped with IP-Symcon Basic, IP-Symcon Professional or IP-Symcon Unlimited, version 2.4 #2000 or higher. Additionally, the corresponding hardware for your building automation has to be installed. All categories, variables and devices shown on the screenshots are examples taken from a sample project. You personal IP-Symcon Mobile App will be individually customized depending on the configuration of your IP-Symcon server system. Please also refer to the documentation concerning the IP-Symcon WebFront. (*) Sending Push Notifications requires at least IP-Symcon 2.7 #2598, an internet connection and a valid IP-Symcon subscription.

Recent changes:
-Fix: Fixed a rare issue where you would receive a "Not all field" error

-New: Support for Push Notifications (*)
-Fix: Delay when using HTML-Boxes multiple times

(*) Sending Push Notifications requires at least IP-Symcon 2.7 #2598, an internet connection and a valid IP-Symcon subscription.

User reviews of IP-Symcon Mobile (deprecated)
Write the first review for this app!
Android Market Comments
No comments in the Android market yet