This is a trial version app. Can be used for 48 hours.
This application can not see that coming.
- The company, while the 10th floor to the seat of the normal mode, but the 8th floor conference room automatically set to silent mode.
- Such as apartments and dormitories, the normal mode when you are in his room, but at a friend's living room floor the other is automatically set to silent mode.
Method using GPS or other location is such that you can not!
Of course, this can of course.
- At home normal mode, but leaving the house automatically set to silent mode.
The GPS system is in automatic mode switching manner could fine scheme, WiFi is easy.
Now, who are interested, please come try this app.
This application is using the radio WiFi, is a very useful application that automatically ON / OFF for silent mode.
Usable in those who usually do not use the WiFi.
How to use
1. To start the app.
2. "Register" button and tap the access point to register any WiFi access point from the list.
3. "Start Service" button.
After that, you automatically become a normal mode is within reach of radio access points registered, silent mode automatically when you move outside the coverage area.
The access point can register up to 10. They need to be connected to an access point is not so, "Register" is displayed if the access point, you can register at any access point.
There is no access point at home. I called. "Register" button please try. Just register for the access point if one access point appears in the list. This is OK.
Once you have registered once access point, then nothing is free, automatically every day, regardless of the hour is done ON / OFF for silent mode, depending on location.
If necessary, you can set the receiver sensitivity. Receiver sensitivity is a 5 star maximum sensitivity setting is the most fast response.
- Please keep the WiFi settings to ALWAYS ON.
- Sleep in the WiFi settings, there seems to be running and what not even sleep through the application of this model. Please set tested running on your terminal. If unsure, please try it as is anyway.
- This application is to operate by sensing changes in signal strength. Therefore, fixing the position of the terminal does not change while the very strong radio signal strength, may be sluggish.
Supported stealth SSID.
After the update, please to restart the service.