Mobilscan - your OBD tool

Mobilscan - your OBD tool


NB: Requires a MobilScan OBD adapter - get it from www.mobilscan.dk. It will not work with other adapters.

We have apparently not been sufficient clear about supported cars:
As this is an OBD adapter, only EOBD/OBDII compatible cars are supported.
In EU, all cars sold since 2001(gasoline)/2004(diesel) are required to be EOBD/OBDII compatible.
As far as we can tell, most brands comply, but if you have a French car, you may want to check its compatibility.
You may have luck with older cars, too.

Read more at www.mobilscan.dk!

** 2.6 **
More workarounds for the phones' different ways of handling BT pairing and connection.

** 2.5 **
Some phones (XPeria GO, and others using Android 4.X) have seen problems connecting to the adapter. Release 2.5 contains a workaround that seems to have fixed this.
The font size now respects the general font scaling setting on the phone.

** 2.4 **
HUD mode for Instrument page (1 or two instruments only, 3/4 would be too cluttered).
Select HUD from the menu. Tap the HUD display to select color.
For Android 3.0 and newer.

*** New in 2.3 ***
Workaround for the apparent Bluetooth problems introduced in Android 4.2 and 4.3. Tested on Nexus4, HTC One, and Samsung Galaxy S4 mini.

*** New in 2.2 ***
View your previous reports as 'My reports' (report page).

*** New in version 2.1.4 ***
* Sharing of snapshot report now also possible to facebook and similar services. Requires that you have the Facebook app installed.
* 'Real' fuel consumption calculation added - FOR GASOLINE/PETROL VEHICLES. This will only be visible on vehicles having MAF (Mass AirFlow), otherwise we simply don't have the necessary information. Note that the value may be visible also on diesel vehicles, but that calculated value is most likely completely wrong, then. We have no (sure) way of detecting a diesel, so in that case, you'll have to use the 'Energy burn' calculation instead.
* Take a screenshot and share it with your friends. Available from the menu (or in the action bar if there's room).


Now you do not need to drive on with the MIL light on.
Now you do not need to wait to go to the garage with your car to know what is wrong.
Now you can prepare the garage by knowing what is wrong.
Now you can see what is wrong with your car on your holiday so that you know if you can drive on.

And all this for less than what most garages take for doing the same test once.

The system comprises an this app and an OBD Bluetooth adapter you either buy at the local dealer or online.

MobilScan gives access to car information as defined by the ISO standards about OBD, this means that you can read out fault codes, continuously receive and display a full list of engine parameters like oxygen sensor readings, air mass, temperature sensors and other parameters used by the engine control computer (ECU).
When you want to capture the current state of the car, you may send a 'snapshot report'. MobilScan compiles information about the current state of the car, and allows you to send this as a HTML report to a receiver of your choice (e-mail, Bluetooth, ...)

NB! The MobilScan software is free, but we're trying to make a living from this, and you'll have to buy the corresponding MobilScan OBD adapter from us. Please contact [email protected] for pricing and availability in your region. If you are already a MobilScan customer, you may use your existing OBD adapter.

If you are just looking for a fault code lookup tool, try http://market.android.com/details?id=com.care2wear.dtclookup_full


Credit:
Version 2.0 uses the ActionBarSherlock framework to implement action bar support on early Android versions. If you're a developer: try it!



keywords: mobilscan1obd1tool

Recent changes:
2.6: Another BT pairing fix.
2.5: Workaround for BT issues on some phones. Font now scales with general phone settings for font size.2.4: HUD mode added for instruments - only for Android 3.X and newer.
2.3: Fix for Bluetooth problems in Android 4.2 and 4.3
2.2: Access previous reports as 'My reports' (from 2.1.4 on). Bugfixes.
2.1.4: Share reports on Facebook (and others), MAF-based fuel consumption, share screenshot
Add to list
Free
71
3.6
User ratings
230
Installs
50,000+
Concerns
1
File size
1527 kb
Screenshots
Video of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool Screenshot of Mobilscan - your OBD tool

About Mobilscan - your OBD tool
NB: Requires a MobilScan OBD adapter - get it from www.mobilscan.dk. It will not work with other adapters.

We have apparently not been sufficient clear about supported cars:
As this is an OBD adapter, only EOBD/OBDII compatible cars are supported.
In EU, all cars sold since 2001(gasoline)/2004(diesel) are required to be EOBD/OBDII compatible.
As far as we can tell, most brands comply, but if you have a French car, you may want to check its compatibility.
You may have luck with older cars, too.

Read more at www.mobilscan.dk!

** 2.6 **
More workarounds for the phones' different ways of handling BT pairing and connection.

** 2.5 **
Some phones (XPeria GO, and others using Android 4.X) have seen problems connecting to the adapter. Release 2.5 contains a workaround that seems to have fixed this.
The font size now respects the general font scaling setting on the phone.

** 2.4 **
HUD mode for Instrument page (1 or two instruments only, 3/4 would be too cluttered).
Select HUD from the menu. Tap the HUD display to select color.
For Android 3.0 and newer.

*** New in 2.3 ***
Workaround for the apparent Bluetooth problems introduced in Android 4.2 and 4.3. Tested on Nexus4, HTC One, and Samsung Galaxy S4 mini.

*** New in 2.2 ***
View your previous reports as 'My reports' (report page).

*** New in version 2.1.4 ***
* Sharing of snapshot report now also possible to facebook and similar services. Requires that you have the Facebook app installed.
* 'Real' fuel consumption calculation added - FOR GASOLINE/PETROL VEHICLES. This will only be visible on vehicles having MAF (Mass AirFlow), otherwise we simply don't have the necessary information. Note that the value may be visible also on diesel vehicles, but that calculated value is most likely completely wrong, then. We have no (sure) way of detecting a diesel, so in that case, you'll have to use the 'Energy burn' calculation instead.
* Take a screenshot and share it with your friends. Available from the menu (or in the action bar if there's room).


Now you do not need to drive on with the MIL light on.
Now you do not need to wait to go to the garage with your car to know what is wrong.
Now you can prepare the garage by knowing what is wrong.
Now you can see what is wrong with your car on your holiday so that you know if you can drive on.

And all this for less than what most garages take for doing the same test once.

The system comprises an this app and an OBD Bluetooth adapter you either buy at the local dealer or online.

MobilScan gives access to car information as defined by the ISO standards about OBD, this means that you can read out fault codes, continuously receive and display a full list of engine parameters like oxygen sensor readings, air mass, temperature sensors and other parameters used by the engine control computer (ECU).
When you want to capture the current state of the car, you may send a 'snapshot report'. MobilScan compiles information about the current state of the car, and allows you to send this as a HTML report to a receiver of your choice (e-mail, Bluetooth, ...)

NB! The MobilScan software is free, but we're trying to make a living from this, and you'll have to buy the corresponding MobilScan OBD adapter from us. Please contact [email protected] for pricing and availability in your region. If you are already a MobilScan customer, you may use your existing OBD adapter.

If you are just looking for a fault code lookup tool, try http://market.android.com/details?id=com.care2wear.dtclookup_full


Credit:
Version 2.0 uses the ActionBarSherlock framework to implement action bar support on early Android versions. If you're a developer: try it!



keywords: mobilscan1obd1tool

Recent changes:
2.6: Another BT pairing fix.
2.5: Workaround for BT issues on some phones. Font now scales with general phone settings for font size.2.4: HUD mode added for instruments - only for Android 3.X and newer.
2.3: Fix for Bluetooth problems in Android 4.2 and 4.3
2.2: Access previous reports as 'My reports' (from 2.1.4 on). Bugfixes.
2.1.4: Share reports on Facebook (and others), MAF-based fuel consumption, share screenshot

Visit Website
User reviews of Mobilscan - your OBD tool
Write the first review for this app!
Android Market Comments
A Google User
Feb 6, 2014
Works well Just plug the adapter to my car (Toyota Rav4 '01) and than found out what the problem was, bought new part and deleted the fail code. Saved me alot of money. Using Samsung Galaxy Note 3
A Google User
Jan 26, 2013
Mobilscan does the job best Boy have I been waiting for a product like this, all my cars get modified, so this is an essential tool for me
A Google User
Jan 26, 2013
Mobilscan does the job best Boy have I been waiting for a product like this, all my cars get modified, so this is an essential tool for me
A Google User
Jan 7, 2013
Works well Just plug the adapter to my car (Toyota Rav4 '01) and than found out what the problem was, bought new part and deleted the fail code. Saved me alot of money. Using Samsung Galaxy Note
A Google User
Nov 5, 2012
Failed to find my ODB II adapter Couldn't even use it.