Prismatik Controller is a remote controller for Prismatik software v.5.11.0 for people who currently have a Lightpack. If you would like more info about Prismatik or Lightpack please visit www.lightpack.tv
With Prismatik Controller you will be able to manage profiles by switching between them and editing them on the fly without having to open the Prismatik app on your computer. You can also change the led colors and play simple animations from the app.
How to set up:
When you installed Prismatic (v5.11.0) on your computer it started a server that runs when Prismatik is running. This app creates a client to connect to Prismatik's server to control the lights.
For this app's client to connect to the server it needs to know what the local IP address is of the computer running Prismatic. To lookup your local IP address just Google: "How to find the local IP address on (windows/a mac)" and follow the intructions to get it.
This app also needs the port that the server is running on if you didn't make any changes to Prismatik the port should be 3636 which is the default for this app. You can confirm that this is the port used by going to the "Experimental" tab of Prismatik's settings. The "Experimental" tab might not be visible for you, so to make it visible go to the "Profiles" tab and check the "Expert mode" checkbox and the new tab will appear.
From the "Experimental" tab you should see the "Enable server" checkbox checked and if not then check it. From this tab you can also confirm the port number and see what your API key is. If you change your API key you will need to make that same change in this app. Also you will need to uncheck the "Listen only on local interfaces" checkbox.
With the IP address, port and API key set up in the app as long as you are on the same network you should be able to connect to Prismatik and change the colors of the lights.
If you have any questions or feedback please feel free to email me at [email protected]
Make sure you update Prismatik on your computer to version 5.11.0 or higher so that the app works with multiple Lightpacks
With 5.11.1 uncheck the "Listen on on local interface" checkbox under the experimental tab in Prismatik.
-New moodlight animation.
-Multiple Lightpack support with Prismatik verstion 5.11.0 and up.
-Better animation smoothness.
-Custom screen resolutions.
If you have any suggestions or feedback please feel free to email me at [email protected]