Real-time Net Watcher

Real-time Net Watcher


Displays the network speed in the notification bar at the top. I can monitor in real time while in use by another application.
You can be monitored in realtime when the speed is a concern when operating the app, and press down on the notification bar.
Also, because we're also displayed this month traffic and traffic today, please help the person who uses the straight-line network plan there is an upper limit.

In the body of the screen is to keep a log of their daily communication. Since the communication graph is occurring any time
You can figure out how much of the communication has occurred which time zone.
Traffic, or communication, please use to understand the amount of packets.

Notification bar unit is the number of bytes
1bps is 1bit/second. ※ I changed from version 2.03.
1KB is 1024Byte.

Communication graph screen of the main body,
Uploaded red, blue is the download.
The counting unit button, chart, list changes.
The tap in the graph, the period-1 to target on the left and on the right side to +1.

WIFI and 3G connection will be monitored. Switching is possible by setting button.
Monitored the notification bar switched by this button.
WIFI switch in the graph, tap character in 3g.

History of the graph can be moved to the SD card month aggregate is complete.
With it, you will be able to reduce the application data area.
In that case, as expected, but can be viewed up to now, take some time to browse.
By re-incorporated into the terminal, but you can return to the original speed.
If the SD card icon is displayed in the upper right corner, and load from the SD card.

Android2.2 or over, you can graph the amount of communication application unit.
Please press the button graphical representation of the target application from the list.
Time series selection is selected according to the date.

This application, the service has been started on communication record.
If due to task killer was stopped, it may not be possible to measure correctly.
To start automatically with the terminal's power ON, the setting is not necessary in normal use in particular.


I made it possible to output to SD card to save the communication log that body.
It is also possible to capture additional data that you saved.


There was a problem with device-specific problems, the network can not be monitored properly.
Therefore, I have provided the mode is set to be monitored to detect network currently connected to preferences for those who can not be monitored.
default is the standard monitoring app.
custom is not to detect the network settings in use to monitor it.

Example)
If you can not detect the 3G, the 3G connection in the network, press the Settings button in the Preferences 3G surveillance, please set custom.

Note)
network is not connected, if the custom configuration can not, it is unknown for the network. Because they can not be detected at the time of setting, therefore, is not connected after setting the custom, and make custom settings again, we are back to the default.

For (such as GALAXYS2), from the connection history, I was selected to enable network communication with proven models that can not be detected in the currently connected network. Please choose what you think is the appropriate line.
※ The reset once the surveillance, monitoring people who are successful, please do not change the settings.

Recent changes:
v2.10
Add a widget, IPConnectSearcher link

v2.07
Add a widget, add delete function of the aggregate completion month

v2.06
If you move to SD card in October, to solve the problem that is not year display

v2.05
Add to transparent icon
Adding style to black notification

v2.04
Power-saving measures implemented at the time of the screen OFF
Add to list
Free
80
4.0
User ratings
178
Installs
10,000+
Concerns
0
File size
510 kb
Screenshots
Screenshot of Real-time Net Watcher Screenshot of Real-time Net Watcher Screenshot of Real-time Net Watcher Screenshot of Real-time Net Watcher Screenshot of Real-time Net Watcher

About Real-time Net Watcher
Displays the network speed in the notification bar at the top. I can monitor in real time while in use by another application.
You can be monitored in realtime when the speed is a concern when operating the app, and press down on the notification bar.
Also, because we're also displayed this month traffic and traffic today, please help the person who uses the straight-line network plan there is an upper limit.

In the body of the screen is to keep a log of their daily communication. Since the communication graph is occurring any time
You can figure out how much of the communication has occurred which time zone.
Traffic, or communication, please use to understand the amount of packets.

Notification bar unit is the number of bytes
1bps is 1bit/second. ※ I changed from version 2.03.
1KB is 1024Byte.

Communication graph screen of the main body,
Uploaded red, blue is the download.
The counting unit button, chart, list changes.
The tap in the graph, the period-1 to target on the left and on the right side to +1.

WIFI and 3G connection will be monitored. Switching is possible by setting button.
Monitored the notification bar switched by this button.
WIFI switch in the graph, tap character in 3g.

History of the graph can be moved to the SD card month aggregate is complete.
With it, you will be able to reduce the application data area.
In that case, as expected, but can be viewed up to now, take some time to browse.
By re-incorporated into the terminal, but you can return to the original speed.
If the SD card icon is displayed in the upper right corner, and load from the SD card.

Android2.2 or over, you can graph the amount of communication application unit.
Please press the button graphical representation of the target application from the list.
Time series selection is selected according to the date.

This application, the service has been started on communication record.
If due to task killer was stopped, it may not be possible to measure correctly.
To start automatically with the terminal's power ON, the setting is not necessary in normal use in particular.


I made it possible to output to SD card to save the communication log that body.
It is also possible to capture additional data that you saved.


There was a problem with device-specific problems, the network can not be monitored properly.
Therefore, I have provided the mode is set to be monitored to detect network currently connected to preferences for those who can not be monitored.
default is the standard monitoring app.
custom is not to detect the network settings in use to monitor it.

Example)
If you can not detect the 3G, the 3G connection in the network, press the Settings button in the Preferences 3G surveillance, please set custom.

Note)
network is not connected, if the custom configuration can not, it is unknown for the network. Because they can not be detected at the time of setting, therefore, is not connected after setting the custom, and make custom settings again, we are back to the default.

For (such as GALAXYS2), from the connection history, I was selected to enable network communication with proven models that can not be detected in the currently connected network. Please choose what you think is the appropriate line.
※ The reset once the surveillance, monitoring people who are successful, please do not change the settings.

Recent changes:
v2.10
Add a widget, IPConnectSearcher link

v2.07
Add a widget, add delete function of the aggregate completion month

v2.06
If you move to SD card in October, to solve the problem that is not year display

v2.05
Add to transparent icon
Adding style to black notification

v2.04
Power-saving measures implemented at the time of the screen OFF

Visit Website
User reviews of Real-time Net Watcher
Write the first review for this app!
Android Market Comments
A Google User
Apr 1, 2014
Problem without solved Monthly starting date of mobile data is not on 1st, but 14th requested from cellphone company
A Google User
Jan 26, 2014
Not bad I like the look out this app and it certainly has potential, but I'm not convinced it's all that accurate: it's showing my upload speed higher than my line is capable of supporting!
A Google User
Dec 21, 2013
English market Perhaps using screen shots in English would help.
A Google User
Oct 28, 2013
I will work. The app has been good. It will tell you exactly how much data was being used at exact times. It is handy.
A Google User
Jan 3, 2013
Works well.