Sharp Remote Control Aquos TV

Sharp Remote Control Aquos TV


Version 3.0 is optimized for various types of TVs:

To use the program with your LC70C8470U , LC60C8470U , LC70C7450U and LC60C7450U TV, use the Remote Control screen. Problems may occur while using the program with these types of TVs, since they are not sold in Europe and their functionality is not officially tested. If the problems occur, please, send me an email ([email protected]).

To use the program with your European type TV, e.g. LC40-46LE830ETV-RU and LE831E-RU_OM_GB , use the Direct Control screen. The program is fully functional for most European types of TVs.
To change the screens, use horizontal gesture, to get to the menu, use upward gesture or the MENU HW button.

IP remote control for Sharp Aquos TV set.
Your phone must be on the same network.
Connect via wifi!
Funcionality is limited by TV firware.

Short tutorial:

First step
IP setup
1 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “IP setup” > must be set to work
on your home network.
For example:
IP address: 192.168.1.110
NetMask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
MAC: 68:79:ed:xx:xx:xx

Second step
IP Control setup
1 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “IP Control setup” > select
“Change”.
2 To use IP Control, select “Enable”.
3 Set the device name.
4 Set your login ID: ““ (empty) and password: ““ (empty).
5 Set the port to use with IP Control: 10002.
6 Confirm the settings, and then press “OK”.

Third step
Setup phone
1 Connect the phone to your wifi network
2 Start „RemoteControlSharp“
3 press hw Menu button on your phone.
4 Set IP port: 10002.
5 Set IP address: example 192.168.1.114
(must by on the same network as the television) or
press hw Menu button on your phone.
Select the „Find device“ from menu.
Application finds the device on the network.
Select the device Sharp and press hw Back button
Back for return to main screen.
If the TV is not found, the problem is on the network and ask an expert on setting up your networks.

History:
Version 3.0.1:
- bug fixes for Android 3.0 and higher
Version 3.0:
- optimized for various types of TVs
- gestures
- independent of resolution (Phone, tablet)

Version 2.1.3:
-four-digit DTV
-PowerOn central icon light on/off
Version 2.1.2:
- fix black screen at startup when the volume is less than 10
- fix error when input IP and Port is wrong
Version 2.1.1:
- bug fixes
Version 2.1:
- find TV on network.
Version 2.0:
- new design in version 2.0
- optimised for 46LE830E.
- direct choice channel DTV, ATV,SAT.

Recent changes:
- checking on WIFI
- verification IP a PORT
- adding color LED signal
(green-connect,
red-send,
yellow-no connect,
blue-timeout)
- post ads for payment of fees
- fix for Android 4.0
- added HELP
- change the default PORT
- fix IPPowerON
- change icons by request users.
Add to list
Free
63
3.2
User ratings
343
Installs
100,000+
Concerns
0
File size
575 kb
Screenshots
Screenshot of Sharp Remote Control Aquos TV Screenshot of Sharp Remote Control Aquos TV Screenshot of Sharp Remote Control Aquos TV Screenshot of Sharp Remote Control Aquos TV Screenshot of Sharp Remote Control Aquos TV Screenshot of Sharp Remote Control Aquos TV
About Sharp Remote Control Aquos TV
Version 3.0 is optimized for various types of TVs:

To use the program with your LC70C8470U , LC60C8470U , LC70C7450U and LC60C7450U TV, use the Remote Control screen. Problems may occur while using the program with these types of TVs, since they are not sold in Europe and their functionality is not officially tested. If the problems occur, please, send me an email ([email protected]).

To use the program with your European type TV, e.g. LC40-46LE830ETV-RU and LE831E-RU_OM_GB , use the Direct Control screen. The program is fully functional for most European types of TVs.
To change the screens, use horizontal gesture, to get to the menu, use upward gesture or the MENU HW button.

IP remote control for Sharp Aquos TV set.
Your phone must be on the same network.
Connect via wifi!
Funcionality is limited by TV firware.

Short tutorial:

First step
IP setup
1 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “IP setup” > must be set to work
on your home network.
For example:
IP address: 192.168.1.110
NetMask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
MAC: 68:79:ed:xx:xx:xx

Second step
IP Control setup
1 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “IP Control setup” > select
“Change”.
2 To use IP Control, select “Enable”.
3 Set the device name.
4 Set your login ID: ““ (empty) and password: ““ (empty).
5 Set the port to use with IP Control: 10002.
6 Confirm the settings, and then press “OK”.

Third step
Setup phone
1 Connect the phone to your wifi network
2 Start „RemoteControlSharp“
3 press hw Menu button on your phone.
4 Set IP port: 10002.
5 Set IP address: example 192.168.1.114
(must by on the same network as the television) or
press hw Menu button on your phone.
Select the „Find device“ from menu.
Application finds the device on the network.
Select the device Sharp and press hw Back button
Back for return to main screen.
If the TV is not found, the problem is on the network and ask an expert on setting up your networks.

History:
Version 3.0.1:
- bug fixes for Android 3.0 and higher
Version 3.0:
- optimized for various types of TVs
- gestures
- independent of resolution (Phone, tablet)

Version 2.1.3:
-four-digit DTV
-PowerOn central icon light on/off
Version 2.1.2:
- fix black screen at startup when the volume is less than 10
- fix error when input IP and Port is wrong
Version 2.1.1:
- bug fixes
Version 2.1:
- find TV on network.
Version 2.0:
- new design in version 2.0
- optimised for 46LE830E.
- direct choice channel DTV, ATV,SAT.

Recent changes:
- checking on WIFI
- verification IP a PORT
- adding color LED signal
(green-connect,
red-send,
yellow-no connect,
blue-timeout)
- post ads for payment of fees
- fix for Android 4.0
- added HELP
- change the default PORT
- fix IPPowerON
- change icons by request users.
Android Market Comments
A Google User
Jul 27, 2015
Rubbish Rate it 0 if possible
A Google User
Jul 17, 2015
It doesn't work i tried it but it didn't work on my sharp aquos tv
A Google User
Jun 18, 2015
Aquos tv Remote
A Google User
Apr 27, 2015
Works! Works with my Sharp LC-80LE844U, auto detect didn't work and I had to manually configure ip, has ads.
A Google User
Apr 26, 2015
remote sharp