Teleduino Controller V2

Teleduino Controller V2


2014-04-24
V2 of Teleduino Controller is now released as a new package and signed with another key which (hopefully) will eliminate earlier problems

--------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------- FAQ -----------------------------------------------------------

Q: Is the Define serial and pins function same on app and official website?
A: Yes, you can choose to define your pins and Serial baud rate from either the app or the official website, the result will be the same. And if you´we defined your pins before installing the app, no need to do this again.

Q: How do I use the "Use for serial" input?
A: This is useful If you want to control a second Arduino-unit (Ex. RF-transmitting for your home automation system) which is connected to your Teleduino-controlled unit with a serial connection. In the "String to send" field, enter the string you want your Teleduino unit to send to your second unit. For example: Enter "LightOn" (without the quotes) and tick the Send CR box if you wan´t a CR to be sent after the string. A click on the configured button will now send the string "LightOn" on the TX-pin of your Teleduino unit, the second unit should now be programmed to do a certain task when it recieves the string "LightOn" from the serial port, for example sending an RF-code to turn the lights on at home.

--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------

With the Teleduino Controller you can easily manage your Ethernet connected Arduino unit, where you are doesn´t mather any more!

Go to https://www.teleduino.org/ for info about how to setup your unit.

Since this is an early release things supported so far is:
Set the key you got from request at Teleduino site
Define Serial baudrate
Define Digital Pins as output pins
Define Analog or Digital pins as input pins
See the latest string thats been sent to your unit. (As a debug feature)
In total 24 buttons, each can control Digital Out, Digital In, Analog In, Serial etc.
Set your custom label for every button
Set custom label for every section (Long press on section name in main screen)
Reset unit, Ping unit, get uptime and more System tools.

What do YOU want to include? Please share your wishes for future updates.

----------------------------------------

Teleduino Controller Pro is now available in Google Play:
* Support of the MEGA version boards
* 24 buttons in total with the possibility to hide the ones that´s not used.
* Linear functions for Analog In
* Full API support will be added in future releases
* A total manual API-mode where the user can write his own API string to send.

Recent changes:
v2.0:
- Complete Rewrite of code
- New cleaner layout
- All buttons can now run all configurations
- Number of Buttons increased to 24
- Digital Out can be set as presets
- All buttons have the possibility to send a completley manual string (Pro Only)
Add to list
Free
66
3.3
User ratings
3
Installs
100+
Concerns
0
File size
177 kb
Screenshots
Screenshot of Teleduino Controller V2 Screenshot of Teleduino Controller V2 Screenshot of Teleduino Controller V2 Screenshot of Teleduino Controller V2 Screenshot of Teleduino Controller V2

About Teleduino Controller V2
2014-04-24
V2 of Teleduino Controller is now released as a new package and signed with another key which (hopefully) will eliminate earlier problems

--------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------- FAQ -----------------------------------------------------------

Q: Is the Define serial and pins function same on app and official website?
A: Yes, you can choose to define your pins and Serial baud rate from either the app or the official website, the result will be the same. And if you´we defined your pins before installing the app, no need to do this again.

Q: How do I use the "Use for serial" input?
A: This is useful If you want to control a second Arduino-unit (Ex. RF-transmitting for your home automation system) which is connected to your Teleduino-controlled unit with a serial connection. In the "String to send" field, enter the string you want your Teleduino unit to send to your second unit. For example: Enter "LightOn" (without the quotes) and tick the Send CR box if you wan´t a CR to be sent after the string. A click on the configured button will now send the string "LightOn" on the TX-pin of your Teleduino unit, the second unit should now be programmed to do a certain task when it recieves the string "LightOn" from the serial port, for example sending an RF-code to turn the lights on at home.

--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------

With the Teleduino Controller you can easily manage your Ethernet connected Arduino unit, where you are doesn´t mather any more!

Go to https://www.teleduino.org/ for info about how to setup your unit.

Since this is an early release things supported so far is:
Set the key you got from request at Teleduino site
Define Serial baudrate
Define Digital Pins as output pins
Define Analog or Digital pins as input pins
See the latest string thats been sent to your unit. (As a debug feature)
In total 24 buttons, each can control Digital Out, Digital In, Analog In, Serial etc.
Set your custom label for every button
Set custom label for every section (Long press on section name in main screen)
Reset unit, Ping unit, get uptime and more System tools.

What do YOU want to include? Please share your wishes for future updates.

----------------------------------------

Teleduino Controller Pro is now available in Google Play:
* Support of the MEGA version boards
* 24 buttons in total with the possibility to hide the ones that´s not used.
* Linear functions for Analog In
* Full API support will be added in future releases
* A total manual API-mode where the user can write his own API string to send.

Recent changes:
v2.0:
- Complete Rewrite of code
- New cleaner layout
- All buttons can now run all configurations
- Number of Buttons increased to 24
- Digital Out can be set as presets
- All buttons have the possibility to send a completley manual string (Pro Only)

User reviews of Teleduino Controller V2
Write the first review for this app!
Android Market Comments
A Google User
May 22, 2014
Nice app that adds useful functionality to the fantastic Arduino Installation and use is simple after following the Instructable how-to. With regards to the V2 Android app, is it possible to control more than one Arduino? I see only one Teleduino code entry. If control of more than one was possible I would buy the Pro app. I have more issues I'd like to discuss.