Search

TrainSleepTimer (YamanoteLine)

Did you develop this app? Access more services »

TrainSleepTimer (YamanoteLine)


■ Overview of functions
A simple timer overslept prevention (alarm) is.

From the time that was previously registered data, determine an average time between each station ride,
Timer (alarm) can be easily set.

Consider the use of sound in the train will not be heard. Notice the vibration in about 5 seconds.
The terminal is in sleep mode let us know! !

■ Point
The base station does not use such information also Wifi GPS.
Even without any other communication, to minimize the battery consumption.

How ■ (listed in order from the top of the screen).
1. Please choose one of the circumference of the Yamanote Line and 内回Ri. Touch to display the list.

2. "Choose a ride station" button, please select the station name from the list that appears to be riding.
(Listed by order of a different direction and selected with 内回Ri circumference)
(A list that is displayed can be selected by scrolling Yamanote Line station name)

3. "Choosing the ride station," will be displayed to the right of the selected station name.
(If you want to change it again, "Choosing a boarding station" Please re-select button).

4. "Selecting the station alight 'Please select a station and get off the same procedure as described above and a few buttons.

5. "Ride" will be displayed below the average ride time.

6. "Adjust time slider" "-3 minute ride"
You can adjust the range of plus or minus 10 minutes riding time.
The default setting is to be three minutes before the alarm is triggered to prevent overslept.
Please adjust your preferred time by dragging the slider.
(Time will not be set earlier than the current time)

7. "Set alarm time" field, the ride has been adjusted to the current time is set to the terminal
Plus the time is displayed. (Will announce the time and the alarm will be displayed.)

8. "Alarm Set" button on the screen "TrainSleepTimer: I set the alarm" and
Displayed, exit the setting screen automatically.
(When it is time, "TrainSleepTimer: Time is now!" Is displayed and notify you by vibration)
(Vibration continues for about 5 seconds to exit automatically)

※ Set the alarm can be only one. If you reconfigure your settings will be erased before the fire alarm.
(After first setting the alarm, if you set a second alarm, and only valid in the second set)

■ Note
1. To set the terminal based on the time available, at the time of the terminal, please make sure you do not have much lag.
2. Please have available before the pilot.
(Some environments are also available to work. Advance, please understand.)
3. Set the alarm time, please set the alarm to be a little early.
(Not available on the relationship as GPS, flight status is affected by the time the train is not considered)

■ Operating Environment
This application is required and ordered by the vibration function. (Because no sound)
Always, please check that the terminals with a vibration function available.

■ Schedule
Creating such a version is not available, such as subway and GPS
Creating a version of the route as used in the transfer of the Yamanote Line

■ Other
You may like your questions by e-mail usage.
(The answer may take time).
Add to list
$0.98
20
1.0
User ratings
1
Installs
10+
Concerns
0
File size
23 kb
Screenshots
Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine) Screenshot of TrainSleepTimer (YamanoteLine)

About TrainSleepTimer (YamanoteLine)
■ Overview of functions
A simple timer overslept prevention (alarm) is.

From the time that was previously registered data, determine an average time between each station ride,
Timer (alarm) can be easily set.

Consider the use of sound in the train will not be heard. Notice the vibration in about 5 seconds.
The terminal is in sleep mode let us know! !

■ Point
The base station does not use such information also Wifi GPS.
Even without any other communication, to minimize the battery consumption.

How ■ (listed in order from the top of the screen).
1. Please choose one of the circumference of the Yamanote Line and 内回Ri. Touch to display the list.

2. "Choose a ride station" button, please select the station name from the list that appears to be riding.
(Listed by order of a different direction and selected with 内回Ri circumference)
(A list that is displayed can be selected by scrolling Yamanote Line station name)

3. "Choosing the ride station," will be displayed to the right of the selected station name.
(If you want to change it again, "Choosing a boarding station" Please re-select button).

4. "Selecting the station alight 'Please select a station and get off the same procedure as described above and a few buttons.

5. "Ride" will be displayed below the average ride time.

6. "Adjust time slider" "-3 minute ride"
You can adjust the range of plus or minus 10 minutes riding time.
The default setting is to be three minutes before the alarm is triggered to prevent overslept.
Please adjust your preferred time by dragging the slider.
(Time will not be set earlier than the current time)

7. "Set alarm time" field, the ride has been adjusted to the current time is set to the terminal
Plus the time is displayed. (Will announce the time and the alarm will be displayed.)

8. "Alarm Set" button on the screen "TrainSleepTimer: I set the alarm" and
Displayed, exit the setting screen automatically.
(When it is time, "TrainSleepTimer: Time is now!" Is displayed and notify you by vibration)
(Vibration continues for about 5 seconds to exit automatically)

※ Set the alarm can be only one. If you reconfigure your settings will be erased before the fire alarm.
(After first setting the alarm, if you set a second alarm, and only valid in the second set)

■ Note
1. To set the terminal based on the time available, at the time of the terminal, please make sure you do not have much lag.
2. Please have available before the pilot.
(Some environments are also available to work. Advance, please understand.)
3. Set the alarm time, please set the alarm to be a little early.
(Not available on the relationship as GPS, flight status is affected by the time the train is not considered)

■ Operating Environment
This application is required and ordered by the vibration function. (Because no sound)
Always, please check that the terminals with a vibration function available.

■ Schedule
Creating such a version is not available, such as subway and GPS
Creating a version of the route as used in the transfer of the Yamanote Line

■ Other
You may like your questions by e-mail usage.
(The answer may take time).

Visit Website
User reviews of TrainSleepTimer (YamanoteLine)
Write the first review for this app!
Android Market Comments
No comments in the Android market yet