Tvisted TV Remote for Samsung

Tvisted TV Remote for Samsung


Tvisted Remote is an innovative TV remote control – using WiFi or Infrared

Television – finally smart. Tvisted Remote lets you remote control all features of your Smart TV easily. Usually, the app will even auto-detect your channel numbers and is ready to go in a few seconds. Just setup your favorites and forget about the hundreds of channels available. You can even switch channels and adjust volume just by swiping across the screen – no need to look at your smartphone or tablet just to control your TV.

Tvisted Remote works with any up-to-date Android smart phone or tablet. We currently support Samsung Smart TVs (using WiFi) and about 4200 additional devices of different brands (using infrared). For connecting to a Philips TV using WiFi please check out our other apps.

————————————————————

Using WiFi

To use WiFi, your handset and TV need to be connected to same network.

If your Samsung Smart TV comes with the “Smart Hub” feature, you’re good to go. Same applies to certain Samsung Blueray/DVD Players and Set-Top Boxes. Tvisted supports Samsung Smart TVs from generations C, D, E, F and H (not older than 2010). The mobile app contacts the Smart TV over local network (using WiFi) – hence the Samsung Smart TV needs to be connected to your local network using WiFi or a network cable.

Please note: Unfortunately we currently do have limited support for the 2014 “H”-Series only due to some technical changes made by Samsung. Stay tuned. We’ll figure it out.

Please be aware that auto detection will work properly with Series E, F and H, just as some of Series C and D. With Series C and D please ensure that 'Remote Control' within your TV settings is enabled. Routers without "Universal Plug'n'Play" (UPnP) enabled and “DLNA Broadcast” allowed will require you to enter the IP address manually as this prevents auto-detection.

How to connect to the TV using WiFi:

1. Please make sure that your smartphone/tablet and your TV are both connected to the same WiFi network
2. Make sure the TV is turned on and start the app – it will now look up the TV automatically
3. If your TV (on the TV screen) requires approval for the connection please press OK on your “classic” remote control once

Done.

Need help? Check out our support forum at: http://www.tvisted.com/support

————————————————————

Using Infrared (yet a bit experimental)

To use infrared, your mobile device needs to have an infrared blaster. And obviously: Line of sight to the device.

If so, Tvisted can remote control roughly 4200 TVs, Cable Boxes, Disc Players, Stereos and Set-Top Boxes. All major TV brands (e.g. Samsung, LG, Sony, Panasonic) and cable boxes are supported. We’ll come up with a list soon – for now, we suggest you just try it for yourself. The mobile app detects the existence of an infrared blaster automatically and lets you select the type and manufacturer. Since every model has got its different infrared code sets you’ll be asked to just try them (5 different ones at most). If there’s a matching code set, your device will turn on (or off in case you have turned it on before).

We’re still collecting more devices and more important: more code sets. If the entire code set for your device or just a few keys are missing, please drop a line in our support forum.

The infrared feature requires an Android 4.2 (“KitKat”) handset with built-in IR blaster and operates well on the following handsets:
- Samsung Galaxy S IV, S5
- Samsung Galaxy S IV mini
- Samsung Galaxy MEGA
- Samsung Galaxy Tab 7.0 plus
- Samsung Galaxy Tab 7.7 plus
- Samsung Galaxy Tab 2 7.0
- Samsung Galaxy Tab 2 10.1
- Samsung Galaxy Tab 3 8.0
- Samsung Galaxy Note 3
- Samsung Galaxy Note 8.0
- Samsung Galaxy Note 10.1

Let us know if it works on a device not listed here.

————————————————————

Tags: smart view, smartview, samsung, allshare, smartview2.0, smart view 2.0, TV, samsung remote, remote controller, smart tv, samsung smart tv

Recent changes:
Some bugs fixed and a new architecture:

v1.25
- Mixed WiFi+IR services for 2014 H-Series TV (requires IR Blaster)

Version 1.20
- control multiple devices
- compatibility issues pre 4.4 KitKat resolved

Version 1.18
- reworked IR support
- several bugs fixed

Version 1.14
- IR Blaster support for HTC One and KitKat devices
- Loading of channel presets of selectable countries

Please provide feedback on IR featureset with the in-app dialog or by mail to [email protected] (not on Google Play)
Add to list
Free
72
3.6
User ratings
1565
Installs
100,000+
Concerns
0
File size
2741 kb
Screenshots
Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung Screenshot of Tvisted TV Remote for Samsung
About Tvisted TV Remote for Samsung
Tvisted Remote is an innovative TV remote control – using WiFi or Infrared

Television – finally smart. Tvisted Remote lets you remote control all features of your Smart TV easily. Usually, the app will even auto-detect your channel numbers and is ready to go in a few seconds. Just setup your favorites and forget about the hundreds of channels available. You can even switch channels and adjust volume just by swiping across the screen – no need to look at your smartphone or tablet just to control your TV.

Tvisted Remote works with any up-to-date Android smart phone or tablet. We currently support Samsung Smart TVs (using WiFi) and about 4200 additional devices of different brands (using infrared). For connecting to a Philips TV using WiFi please check out our other apps.

————————————————————

Using WiFi

To use WiFi, your handset and TV need to be connected to same network.

If your Samsung Smart TV comes with the “Smart Hub” feature, you’re good to go. Same applies to certain Samsung Blueray/DVD Players and Set-Top Boxes. Tvisted supports Samsung Smart TVs from generations C, D, E, F and H (not older than 2010). The mobile app contacts the Smart TV over local network (using WiFi) – hence the Samsung Smart TV needs to be connected to your local network using WiFi or a network cable.

Please note: Unfortunately we currently do have limited support for the 2014 “H”-Series only due to some technical changes made by Samsung. Stay tuned. We’ll figure it out.

Please be aware that auto detection will work properly with Series E, F and H, just as some of Series C and D. With Series C and D please ensure that 'Remote Control' within your TV settings is enabled. Routers without "Universal Plug'n'Play" (UPnP) enabled and “DLNA Broadcast” allowed will require you to enter the IP address manually as this prevents auto-detection.

How to connect to the TV using WiFi:

1. Please make sure that your smartphone/tablet and your TV are both connected to the same WiFi network
2. Make sure the TV is turned on and start the app – it will now look up the TV automatically
3. If your TV (on the TV screen) requires approval for the connection please press OK on your “classic” remote control once

Done.

Need help? Check out our support forum at: http://www.tvisted.com/support

————————————————————

Using Infrared (yet a bit experimental)

To use infrared, your mobile device needs to have an infrared blaster. And obviously: Line of sight to the device.

If so, Tvisted can remote control roughly 4200 TVs, Cable Boxes, Disc Players, Stereos and Set-Top Boxes. All major TV brands (e.g. Samsung, LG, Sony, Panasonic) and cable boxes are supported. We’ll come up with a list soon – for now, we suggest you just try it for yourself. The mobile app detects the existence of an infrared blaster automatically and lets you select the type and manufacturer. Since every model has got its different infrared code sets you’ll be asked to just try them (5 different ones at most). If there’s a matching code set, your device will turn on (or off in case you have turned it on before).

We’re still collecting more devices and more important: more code sets. If the entire code set for your device or just a few keys are missing, please drop a line in our support forum.

The infrared feature requires an Android 4.2 (“KitKat”) handset with built-in IR blaster and operates well on the following handsets:
- Samsung Galaxy S IV, S5
- Samsung Galaxy S IV mini
- Samsung Galaxy MEGA
- Samsung Galaxy Tab 7.0 plus
- Samsung Galaxy Tab 7.7 plus
- Samsung Galaxy Tab 2 7.0
- Samsung Galaxy Tab 2 10.1
- Samsung Galaxy Tab 3 8.0
- Samsung Galaxy Note 3
- Samsung Galaxy Note 8.0
- Samsung Galaxy Note 10.1

Let us know if it works on a device not listed here.

————————————————————

Tags: smart view, smartview, samsung, allshare, smartview2.0, smart view 2.0, TV, samsung remote, remote controller, smart tv, samsung smart tv

Recent changes:
Some bugs fixed and a new architecture:

v1.25
- Mixed WiFi+IR services for 2014 H-Series TV (requires IR Blaster)

Version 1.20
- control multiple devices
- compatibility issues pre 4.4 KitKat resolved

Version 1.18
- reworked IR support
- several bugs fixed

Version 1.14
- IR Blaster support for HTC One and KitKat devices
- Loading of channel presets of selectable countries

Please provide feedback on IR featureset with the in-app dialog or by mail to [email protected] (not on Google Play)

User reviews of Tvisted TV Remote for Samsung
Write the first review for this app!
Android Market Comments
A Google User
Nov 19, 2014
Works v. well and does more than the stock remote Best solution for my Samsung Smart TV. Thanks dev.
A Google User
Nov 17, 2014
At least detected tv
A Google User
Nov 8, 2014
Good Best
A Google User
Oct 22, 2014
OnePlus One and UN60D7000 Works nicely. Only thing is that the pairing doesn't stay in between standby modes, and power on doesn't work.
A Google User
Oct 21, 2014
Can't connect Dev. told me 2014 H series are supported. But I can't connect to my TV. I get an "connection refused" on port 55000. I did allow device on my TV.