USB OTG Helper [root]

USB OTG Helper [root]


▌ IMPORTANT - Please read the entire description before giving feedback.
IF IT DOES NOT WORK ON YOUR DEVICE, PLEASE DO NOT RATE
It is not supposed to work on every device. If it does not work, please report (with log) here -> http://goo.gl/h6JTN

☆ See list of confirmed working devices: http://usbotghelper.wordpress.com/confirmed-devices/

▌ IMPORTANT - ROOTED devices ONLY!!
What is rooting? Read here -> http://en.wikipedia.org/wiki/Android_rooting



▌ "USB On-The-Go, often abbreviated USB OTG, is a specification that allows USB devices such as digital audio players or mobile phones to act as a host, allowing other USB devices like a USB flash drive, mouse, or keyboard to be attached to them." - Wikipedia


▌Features [ Open Menu -> Settings to enable or disable. ]:
-------------------------------------------------------------------------------------
• Automatically start app on device connect [ See FAQ below ]
• Automatic mount [ Donate version ] [ See FAQ ]
• Mount and Unmount drive with a single click
• Full NTFS support! (FAT, Ext2/3/4 also if kernel supports)
• exFAT support! [ See FAQ to enable ]
• Notification when drives mounted!
• Load modules required automatically (from /system/lib/modules)
• Option to enable utf-8 mode (if kernel support)
• Automatically open the mounted drive [ Donate version ] [ See FAQ ]
• Media scanner triggered on mount [Active media scan in Donate version]
• One click debugging [ Donate version ] [ See FAQ below ]
• No Ads!


▌What phones are supported?
---------------------------------------------
☆ Confirmed: http://usbotghelper.wordpress.com/confirmed-devices/

Any phone in which kernel supports USB Mass storage (stock OR custom kernels OR with appropriate kernel modules)
If it works on your device, or you know of kernels or modules please give the details here -> http://goo.gl/h4xGl

☆ List of modules and kernels can be found here -> http://goo.gl/NXVEL

Please note that this app is an "Helper" app.. it will not magically make your kernel support USB Mass storage!


▌What are the requirements?
-------------------------------------------
• root (su binary)
• supporting kernel / kernel modules
• USB OTG cable ( or direct card reader, see this kickstarter project and support them -> http://goo.gl/LPPrB )


▌WARNING
-------------------
☆ I will not be held responsible for any damage to your device. Do not use for a long time, u may risk burning the device chip/motherboard due to the voltage supply in host mode.


▌FAQ
----------
See -> http://usbotghelper.wordpress.com/faq/


▌Trouble-shooting!:
---------------------------
If still not working, send me debugging data (one-click for donate version)
If still something does not work, mail me. I cannot reply to feedback!


▌Contact
--------------
email : shardulseth {at} aol .com
website : http://usbotghelper.wordpress.com
xda     : http://tinyurl.com/otg-xda


▌Translation credits
-----------------------------
[ Translate to your language -> http://tinyurl.com/otg-translate ]
Greek - Nianios Romanos
Russian - Igor Nedoboy
Ukranian - Alexandr Tobolin (Toz1k)
Hungarian (Magyar) - Varga Zsigmond (Sigismund)
Italian - walpis
German - Patrick Oberdorf


SEO: usbotg, usb , otg, mass storage, mount, drive, NTFS, ntfs-3g, usb host, stickmount, shardul,

Recent changes:
▌v6.6.0
+ Updated ntfs-3g to latest version (v 2014.2.15)
= Bugfixes for crashes on Kitkat (but still wont work on selinux enforcing)

▌v6.5.0
+ exFAT filesystem support (see FAQ to enable)
= Improved layout with ActionBar for API 11+
= Many reliability improvements + bugfixes

▌v6.4.0
+ Updated ntfs-3g to latest version ( v 2013.1.13 )
= Improved + fixed utf-8 mount.

Previous: See http://usbotghelper.wordpress.com/changelog/
Add to list
Free
71
3.6
User ratings
8153
Installs
1,000,000+
Concerns
0
File size
1604 kb
Screenshots
Video of USB OTG Helper [root] Screenshot of USB OTG Helper [root] Screenshot of USB OTG Helper [root] Screenshot of USB OTG Helper [root] Screenshot of USB OTG Helper [root] Screenshot of USB OTG Helper [root] Screenshot of USB OTG Helper [root]
About USB OTG Helper [root]
▌ IMPORTANT - Please read the entire description before giving feedback.
IF IT DOES NOT WORK ON YOUR DEVICE, PLEASE DO NOT RATE
It is not supposed to work on every device. If it does not work, please report (with log) here -> http://goo.gl/h6JTN

☆ See list of confirmed working devices: http://usbotghelper.wordpress.com/confirmed-devices/

▌ IMPORTANT - ROOTED devices ONLY!!
What is rooting? Read here -> http://en.wikipedia.org/wiki/Android_rooting



▌ "USB On-The-Go, often abbreviated USB OTG, is a specification that allows USB devices such as digital audio players or mobile phones to act as a host, allowing other USB devices like a USB flash drive, mouse, or keyboard to be attached to them." - Wikipedia


▌Features [ Open Menu -> Settings to enable or disable. ]:
-------------------------------------------------------------------------------------
• Automatically start app on device connect [ See FAQ below ]
• Automatic mount [ Donate version ] [ See FAQ ]
• Mount and Unmount drive with a single click
• Full NTFS support! (FAT, Ext2/3/4 also if kernel supports)
• exFAT support! [ See FAQ to enable ]
• Notification when drives mounted!
• Load modules required automatically (from /system/lib/modules)
• Option to enable utf-8 mode (if kernel support)
• Automatically open the mounted drive [ Donate version ] [ See FAQ ]
• Media scanner triggered on mount [Active media scan in Donate version]
• One click debugging [ Donate version ] [ See FAQ below ]
• No Ads!


▌What phones are supported?
---------------------------------------------
☆ Confirmed: http://usbotghelper.wordpress.com/confirmed-devices/

Any phone in which kernel supports USB Mass storage (stock OR custom kernels OR with appropriate kernel modules)
If it works on your device, or you know of kernels or modules please give the details here -> http://goo.gl/h4xGl

☆ List of modules and kernels can be found here -> http://goo.gl/NXVEL

Please note that this app is an "Helper" app.. it will not magically make your kernel support USB Mass storage!


▌What are the requirements?
-------------------------------------------
• root (su binary)
• supporting kernel / kernel modules
• USB OTG cable ( or direct card reader, see this kickstarter project and support them -> http://goo.gl/LPPrB )


▌WARNING
-------------------
☆ I will not be held responsible for any damage to your device. Do not use for a long time, u may risk burning the device chip/motherboard due to the voltage supply in host mode.


▌FAQ
----------
See -> http://usbotghelper.wordpress.com/faq/


▌Trouble-shooting!:
---------------------------
If still not working, send me debugging data (one-click for donate version)
If still something does not work, mail me. I cannot reply to feedback!


▌Contact
--------------
email : shardulseth {at} aol .com
website : http://usbotghelper.wordpress.com
xda     : http://tinyurl.com/otg-xda


▌Translation credits
-----------------------------
[ Translate to your language -> http://tinyurl.com/otg-translate ]
Greek - Nianios Romanos
Russian - Igor Nedoboy
Ukranian - Alexandr Tobolin (Toz1k)
Hungarian (Magyar) - Varga Zsigmond (Sigismund)
Italian - walpis
German - Patrick Oberdorf


SEO: usbotg, usb , otg, mass storage, mount, drive, NTFS, ntfs-3g, usb host, stickmount, shardul,

Recent changes:
▌v6.6.0
+ Updated ntfs-3g to latest version (v 2014.2.15)
= Bugfixes for crashes on Kitkat (but still wont work on selinux enforcing)

▌v6.5.0
+ exFAT filesystem support (see FAQ to enable)
= Improved layout with ActionBar for API 11+
= Many reliability improvements + bugfixes

▌v6.4.0
+ Updated ntfs-3g to latest version ( v 2013.1.13 )
= Improved + fixed utf-8 mount.

Previous: See http://usbotghelper.wordpress.com/changelog/

Android Market Comments
A Google User
Thursday 12:52 PM
Crashes Crashes on 5.1.1 Permissive selinux and rooted. Works with stickmount.
A Google User
Thursday 6:24 AM
Thank You For Making this App If your Phone Or Tablet is not suitable for this app or you occur Failure like cant open your usb or appli. Crushing my be your device is not compatible to this app the only solution is buy a new device that has OTG Support and for sure you can use this but I not telling that your device is broken but you just telling that your device does not Support OTG So bottom line ENJOY YOUR DEVICE W/OUT OTG BECOUSE YOUR DEVICE IS MADE FOR YOU TO ENJOY W/OUT PUTTING A USB. just making sense Don't froceDeviceORitBroken
A Google User
Wednesday 5:48 AM
Great loved it I installed slimkat 4..4.4 otg was gone . after I installed this it works great. Thanks dev.
A Google User
5 days ago
Works great. Phone "Sony Ericsson Xperria Neo V" with Android 4.1.2 (Cyanogenmod Haida)
A Google User
6 days ago
Opps!its always fake Its not working ya