DTC Fault Memory erase for VAG

DTC Fault Memory erase for VAG


This Software can erase Volkswagen, Audi, Seat, Skoda DTC Fault memory in all ECU`s at once.
Works with VAG cars start from year 2005 with CAN gateway.

except some models:
i.e. Skoda Fabia, VW Polo, VW Lupo to year 2009

ELM327 compatible Bluetooth adapter must be used
1. Plug ELM327 to car OBDII connector
2. Run software on your Smart phone
Wait few seconds and all errors in all electronic systems will be erased.

Some faults cannot be cleared (such as internal ECU faults) and the control module may explicitly refuse. Be aware, clearing fault Codes does not fix the problem that caused the fault!

Recent changes:
v4.1.5 UDS Fault code decoding.Requires online connection (Beta)

v4.05 detects some fake china ELM327 adapters that not support full set of commands and cant work properly

v4.0 share scan data to mechanic

v3.9 autoscan function add

v3.8 fault clear support for some 2013+ models

v3.7 add Instrument panel testing (Light, segment, tachometer, speedometer)

v3.6 add more fault codes

v.3.5 add support for some 2009 up models
UDS fault codes still not decoded (unknown)

feedbacks are welcome
Add to list
Free
76
3.8
User ratings
862
Installs
100,000+
Concerns
1
File size
2521 kb
Screenshots
Screenshot of DTC Fault Memory erase for VAG Screenshot of DTC Fault Memory erase for VAG Screenshot of DTC Fault Memory erase for VAG Screenshot of DTC Fault Memory erase for VAG
About DTC Fault Memory erase for VAG
This Software can erase Volkswagen, Audi, Seat, Skoda DTC Fault memory in all ECU`s at once.
Works with VAG cars start from year 2005 with CAN gateway.

except some models:
i.e. Skoda Fabia, VW Polo, VW Lupo to year 2009

ELM327 compatible Bluetooth adapter must be used
1. Plug ELM327 to car OBDII connector
2. Run software on your Smart phone
Wait few seconds and all errors in all electronic systems will be erased.

Some faults cannot be cleared (such as internal ECU faults) and the control module may explicitly refuse. Be aware, clearing fault Codes does not fix the problem that caused the fault!

Recent changes:
v4.1.5 UDS Fault code decoding.Requires online connection (Beta)

v4.05 detects some fake china ELM327 adapters that not support full set of commands and cant work properly

v4.0 share scan data to mechanic

v3.9 autoscan function add

v3.8 fault clear support for some 2013+ models

v3.7 add Instrument panel testing (Light, segment, tachometer, speedometer)

v3.6 add more fault codes

v.3.5 add support for some 2009 up models
UDS fault codes still not decoded (unknown)

feedbacks are welcome

Android Market Comments
A Google User
Aug 17, 2015
vagcom without ross tech this works a treat for CAN based obd cars which with vag are generally 2005/2006 onwards, prior to that they used a system called K-LINE based obd, which is a completly different (and slow) protocol used as far back as the late 80's, K-LINE obd and CAN obd use different pins within the OBD plug, if your unsure wiki it
A Google User
Aug 14, 2015
Torque lite couldn't read the fault codes of my VW Touran but this little puppy had no trouble doing so. Nice.
A Google User
Aug 13, 2015
The only Android app which works with VAG cars natively. Can't recognize some ECUs in some cars, but hope it will be better and better with updates. Thanks dev, consider to make paid version with more advanced features like editing parameters, adaptations, etc.
A Google User
Aug 6, 2015
Not picking up anything. Connects to OBDLINK ok but not recognising 1 single ecu on a 2014 model A4. Doesn't connect to cheap Elm module?
A Google User
Aug 1, 2015
Not picking up anything. Connects to OBDLINK ok but not recognising 1 single ecu on a 2014 model A4.