Vaper's Toolbox

Vaper's Toolbox


Vaper's Toolbox was designed specifically for those vaper's who are wanting to build their own coils. It helps newcomers and experts alike with the complex calculations required to build the perfect coil. It currently consists of four tools:

1. Wire Cutter helps you calculate how long each piece of coil wire needs to be to achieve the proper resistance. Supports single, dual, triple, and quad coil design. Wire types supported are Kanthal (A-1, A, and D) as well as Nichrome (60 and 80). Wire Gauges supported are AWG 22, 24, 26 - 36. Recently added are 6 sizes of Kanthal A-1 Ribbon wire. It can also display calculated lengths in inches, cm, mm, and even fractional inches (4 3/16).

2. Coil Builder helps determine how many wraps the coil needs to be using the correct length of wire.
Using the wire length from Wire Cutter along with the coil diameter and estimated length of the leads, it will calculate the exact number of wraps you should use. Diameter size can be input as inches, cm, or mm, and can be set independently of the length settings.

3. Power Tool calculate either voltage or wattage at which you are vaping based on your inputs and setting.
Basically a simple Ohm's Law calculator designed to help determine the power or voltage you should use.

4. Converter is a new conversion tool that can convert inches to mm and back as well as convert fractions to decimals.

Try it out. We think you will agree that Vaper's Toolbox is a must have for any e-cigarette enthusiast that is planning on building their own coils.

This app should work with any android version 2.2 or later.

Recent changes:
April 22, 2014: Ribbon Wire!!! We have added support for 6 sizes of Kanthal A-1 Ribbon wire.

NOTE: For the new wire we pulled the resistance values from temcoindustrialpower but we have noticed some differences from these values and what some other sites list for the same wire. If you find that any of these values are indeed wrong, PLEASE let us know and we will correct it.

Ohms/ft
.04 x .01mm - 11.4
.05 x .01mm - 9.2
.06 x .01mm - 7.68
.07 x .01mm - 6.58
.08 x .01mm - 5.76
.09 x .01mm - 5.12
Add to list
Free
83
4.2
User ratings
2056
Installs
100,000+
Concerns
0
File size
422 kb
Screenshots
Screenshot of Vaper's Toolbox Screenshot of Vaper's Toolbox Screenshot of Vaper's Toolbox Screenshot of Vaper's Toolbox
About Vaper's Toolbox
Vaper's Toolbox was designed specifically for those vaper's who are wanting to build their own coils. It helps newcomers and experts alike with the complex calculations required to build the perfect coil. It currently consists of four tools:

1. Wire Cutter helps you calculate how long each piece of coil wire needs to be to achieve the proper resistance. Supports single, dual, triple, and quad coil design. Wire types supported are Kanthal (A-1, A, and D) as well as Nichrome (60 and 80). Wire Gauges supported are AWG 22, 24, 26 - 36. Recently added are 6 sizes of Kanthal A-1 Ribbon wire. It can also display calculated lengths in inches, cm, mm, and even fractional inches (4 3/16).

2. Coil Builder helps determine how many wraps the coil needs to be using the correct length of wire.
Using the wire length from Wire Cutter along with the coil diameter and estimated length of the leads, it will calculate the exact number of wraps you should use. Diameter size can be input as inches, cm, or mm, and can be set independently of the length settings.

3. Power Tool calculate either voltage or wattage at which you are vaping based on your inputs and setting.
Basically a simple Ohm's Law calculator designed to help determine the power or voltage you should use.

4. Converter is a new conversion tool that can convert inches to mm and back as well as convert fractions to decimals.

Try it out. We think you will agree that Vaper's Toolbox is a must have for any e-cigarette enthusiast that is planning on building their own coils.

This app should work with any android version 2.2 or later.

Recent changes:
April 22, 2014: Ribbon Wire!!! We have added support for 6 sizes of Kanthal A-1 Ribbon wire.

NOTE: For the new wire we pulled the resistance values from temcoindustrialpower but we have noticed some differences from these values and what some other sites list for the same wire. If you find that any of these values are indeed wrong, PLEASE let us know and we will correct it.

Ohms/ft
.04 x .01mm - 11.4
.05 x .01mm - 9.2
.06 x .01mm - 7.68
.07 x .01mm - 6.58
.08 x .01mm - 5.76
.09 x .01mm - 5.12

User reviews of Vaper's Toolbox
Write the first review for this app!
Android Market Comments
A Google User
May 6, 2015
Works as intended Works as intended
A Google User
Apr 30, 2015
Nice app....but needs ni200 With all the temp mods coming out there needs to be NI200 wire added.
A Google User
Apr 26, 2015
Great Works perfectly
A Google User
Apr 25, 2015
Accurate I learned how to build using this.
A Google User
Apr 24, 2015
Amazing app It is a good app for starters and to get a general idea of how many times you have to wrap around what size bit/screwdriver to get the desired ohms. Awesomeness!
Version 1000000
Version 1000000