Watch my Bluetooth Devices

Watch my Bluetooth Devices


You are using a Bluetooth handsfree set in your car, or streaming your music via Bluetooth to an A2DP-capable device? Therefore the Bluetooth module of your Android device is permanently enabled and it consumes clearly too much of your battery?

Then you should try "Watch my Bluetooth Devices".

"Watch my Bluetooth Devices" enables the Bluetooth module of your Android device in an interval. If none of your Bluetooth devices is available, the Bluetooth module will be turned off instant. This way the power consumption is reduced to the minimum.

Beside this basic functionality "Watch my Bluetooth Devices" offers a lot of additonal features to fit all your needs.

Features:
- Consider airpane mode, connected charging cable, low battery, active WiFi connection as well as incoming and outgoing calls
- Event-based notifications (ringtone and/or vibration)
- Control functionality via status bar
- A2DP auto connect
- Integrated help and FAQ
- Bi-lingual user interface (German, English)
- Free of charge and free of ads

On the one hand "Watch my Bluetooth Devices" is very easy to use. On the other hand it's highly configurable. The good documentation makes sure that all questions are answered.

The further development of "Watch my Bluetooth Devices" depends on your feedback. If you notice a misbehavior or you miss some feature, please don't give a bad rating. Instead send some feedback to the developer.

The detailed procedure for reporting a misbehavior is described in the integrated help. Thanks for your support!

If you have any questions, please send an e-mail to the support address below. Questions within ratings cannot be answered.

If you want to support the further development of "Watch my Bluetooth Devices" with a small donation, you find a link to the PayPal donation site in the integrated help. Or direct on http://www.asd-app-studio.de. Thank you very much!

Permissions:
- "Bluetooth administration" and "Create Bluetooth connections": Watching Bluetooth connections and enabling/disabling of Bluetooth module
- "Read phone state and identify" and "Intercept outgoing calls": Enabling the Bluetooth module on incoming and outgoing calls
- "Automatically start at boot": Starting the service on system boot
- "Prevent phone from sleeping": Ensure your phone doesn't go sleeping during active operations
- "Control vibrator": Make some notification in the form of a short vibration alarm
- "Modify/delete SD card contents": Creating a log file on your SD card for troubleshooting
- "View network state" and "View Wi-Fi state": Temporary stop service on active WiFi connection


Keywords: Bluetooth, Toggle, A2DP, Auto connect, Handsfree set, Headset, Power consumption, Battery life, Automation

Recent changes:
Version 1.9.2
- Bugfix: error on some devices after activating airplane mode (Thanks to Martin Gruber)
- Bugfix: incorrect behavior of setting "Temporary stop service on low battery" in combination with device reboot (Thanks to Ruben Timoncini and Dr. Christian Bernfeld)
- Display warning in case the Bluetooth module is not responding any more (Thanks to Marco Kitzmann)
- Improved stability
Add to list
Free
85
4.3
User ratings
109
Installs
10,000+
Concerns
0
File size
713 kb
Screenshots
Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices Screenshot of Watch my Bluetooth Devices

About Watch my Bluetooth Devices
You are using a Bluetooth handsfree set in your car, or streaming your music via Bluetooth to an A2DP-capable device? Therefore the Bluetooth module of your Android device is permanently enabled and it consumes clearly too much of your battery?

Then you should try "Watch my Bluetooth Devices".

"Watch my Bluetooth Devices" enables the Bluetooth module of your Android device in an interval. If none of your Bluetooth devices is available, the Bluetooth module will be turned off instant. This way the power consumption is reduced to the minimum.

Beside this basic functionality "Watch my Bluetooth Devices" offers a lot of additonal features to fit all your needs.

Features:
- Consider airpane mode, connected charging cable, low battery, active WiFi connection as well as incoming and outgoing calls
- Event-based notifications (ringtone and/or vibration)
- Control functionality via status bar
- A2DP auto connect
- Integrated help and FAQ
- Bi-lingual user interface (German, English)
- Free of charge and free of ads

On the one hand "Watch my Bluetooth Devices" is very easy to use. On the other hand it's highly configurable. The good documentation makes sure that all questions are answered.

The further development of "Watch my Bluetooth Devices" depends on your feedback. If you notice a misbehavior or you miss some feature, please don't give a bad rating. Instead send some feedback to the developer.

The detailed procedure for reporting a misbehavior is described in the integrated help. Thanks for your support!

If you have any questions, please send an e-mail to the support address below. Questions within ratings cannot be answered.

If you want to support the further development of "Watch my Bluetooth Devices" with a small donation, you find a link to the PayPal donation site in the integrated help. Or direct on http://www.asd-app-studio.de. Thank you very much!

Permissions:
- "Bluetooth administration" and "Create Bluetooth connections": Watching Bluetooth connections and enabling/disabling of Bluetooth module
- "Read phone state and identify" and "Intercept outgoing calls": Enabling the Bluetooth module on incoming and outgoing calls
- "Automatically start at boot": Starting the service on system boot
- "Prevent phone from sleeping": Ensure your phone doesn't go sleeping during active operations
- "Control vibrator": Make some notification in the form of a short vibration alarm
- "Modify/delete SD card contents": Creating a log file on your SD card for troubleshooting
- "View network state" and "View Wi-Fi state": Temporary stop service on active WiFi connection


Keywords: Bluetooth, Toggle, A2DP, Auto connect, Handsfree set, Headset, Power consumption, Battery life, Automation

Recent changes:
Version 1.9.2
- Bugfix: error on some devices after activating airplane mode (Thanks to Martin Gruber)
- Bugfix: incorrect behavior of setting "Temporary stop service on low battery" in combination with device reboot (Thanks to Ruben Timoncini and Dr. Christian Bernfeld)
- Display warning in case the Bluetooth module is not responding any more (Thanks to Marco Kitzmann)
- Improved stability

User reviews of Watch my Bluetooth Devices
Write the first review for this app!
Android Market Comments
A Google User
Aug 14, 2014
169 Like
A Google User
Mar 11, 2014
Awesome Right
A Google User
Feb 7, 2014
Nothing No use
A Google User
Feb 7, 2014
Save alot battery of my Z1 Thank alot the creator
A Google User
Nov 6, 2013
Does it works Hey does it work in galaxy y?