Get the Popular Communication apps among men on AppBrain

Call log Smart Extras™

Wed, 07 Mar 2012 17:24:06 +0000

This is the official call log application for the Sony Smart Wireless Headset pro. The application enables you to browse the phone call log on your Smart Wireless Headset pro, and even make outgoing calls.

Note: This application will not be shown in your phone application screen. Access application settings via LiveWare™ manager, where you can also enable or disable this Smart Wireless Headset pro application.

LiveWare™ extension for Smart Wireless Headset pro

Recent changes:
- Go back to list if cancel in prompt functionality has now been implemented
- Fixed issue with text "Empty" showing for a very short while when opening the call log.

Knock Detector

Thu, 06 Sep 2012 00:21:39 +0000

Check your gas engine for detonations ! Ensure that your everyday car or tuned machine is working fine and gas is good. You should have Torque Pro installed and OBD2 device connected. Knock Detector will:
- report detonations
- show throttle position
- monitor engine coolant and intake air temperatures
Knock Detector is Torque Pro plugin - install Torque Pro first and start Knock Detector from Torque's main menu and make sure OBD2 adapter is connected. While driving at low rpm on 3rd gear just press throttle to max position and wait a safe period of time. Test will start automatically and finish as you depress pedal. Notification sounds will be played. Test will cover the passed rev range. If testing on automatic gear box ensure that gears are not switched during the test.
Warning - please ensure safe driving conditions - highways only !!!

In order to work on all car models Knock Detector uses heuristic algorithm to find detonations. It is based on analysis of timing advance, throttle, revs and speed. On some ECUs it may report knocks but the reason could be timing retard because of specific factory tune.

Knock Detector will not report minor car specific knock events so it can also miss some detonations. However it will report ECU learned detonations. Such knock events will likely disappear at some moment. Detonations can be real or fake, they can appear and disappear, so there is no reason to worry if such are reported. Detonation may be caused just by depressing the throttle at high revs. Some stock ECUs pull timing 0.5 - 1.00 even on WOT so fake knock will be detected.

Engine coolant and intake air temperaturesare also monitored as major knock factors. Avoid spirited driving or testing when both values are not green - too cold or too hot temperatures can cause detonations.

More features are coming soon. Used every day on my heavily modified Subaru STI ! Drive safe and have fun !

P.S.
Русские друзья, вы должны установить Torque Pro с OBD2(ELM327) устройство. Спасибо !

Amis français, vous devez installer Torque Pro avec OBD2(ELM327) engin aussi.

Recent changes:
Added Celsius/Fahrenheit temperatures support depending on user preference.

VX ConnectBot

Thu, 08 Dec 2011 12:01:11 +0000

Open-source SSH and telnet client with SCP file transfer. Based on original ConnectBot.

Feature enhancements:
- background file transfer (SCP protocol)
- character picker dialog (on-screen button and hardware SYM key)
- single line input (on-screen button)
- tap and hold menu (switch to fullscreen mode, change font size)
- save SSH keys as files
- save console screenshots (PNG format)
- new key mappings (hardware keyboard)
- lots of bugfixes

VX ConnectBot provides additional customization for smartphones with a physical keyboard.
Currently, there are customizations for the following smartphones:
- full hardware keyboard (e.g. bluetooth keyboard)
- Samsung Captivate Glide (SGH-i927)
- Sony Ericsson Xperia pro (MK16i)
- Sony Ericsson Xperia mini pro (SK17i)

Recent changes:
support for Asus Transformer Pad Series Mobile Dock
support for Samsung Captivate Glide running ICS
fixed typing of accentuated characters
fixed generation of DSA keys
(full changelog http://github.com/vx/connectbot)

Groundhog Usenet Reader

Thu, 17 Dec 2009 13:14:20 +0000

Open source project page:
https://launchpad.net/groundhog

Report bugs at:
https://bugs.launchpad.net/groundhog

Usenet reader with:

- International charsets
- Online/Offline mode
- Colored quoting
- MIME/uuencoded attachments
- Threading
- Starring and banning of authors&threads.
- Notifications
- SSL connection
- etc

Recent changes:
Bugfixes

FreeMobile Suivi Conso

Thu, 09 Feb 2012 14:19:09 +0000

Fonctionnalités:
¤ Démarrage sur messagerie
¤ Choix du thème (noir ou blanc)
¤ Connexion directe ou par clavier
¤ Multicompte
¤ Multiligne
¤ Messagerie visuelle (visualisation, lecture, suppression)
¤ Conso voix , sms , mms , data
¤ Barres de progression
¤ Détails des communications voix , sms , mms
¤ Visualisation des factures
¤ Mode hors ligne
¤ Conversion numéros en noms de contacts (permission de lire les contacts nécessaire)

Nouveau fonctionnement :
- Identification par clavier virtuel
ou
- Identification directe (par login)

Les deux modes sont indépendants. Si vous ne souhaitez pas enregistrer votre login dans l'appli vous pouvez continuer à utiliser le clavier. Sinon faites une édition du/des comptes pour ajouter chaque login et cochez la case dans les paramètres.

NB : NÉCESSITE un accès data wifi.

-------

Application non affiliée à Free et FreeMobile
Développée sur HTC Desire & Motorola Razr i

-------
Historique:

v3.7.6
- Ajout choix par défaut du tri
- Ajout des contrôles de lecture messagerie
- Fix tri par date
- Fix conversion numéros en contacts
v3.7.4
- Problème de connexion
- Factures vides pour les comptes multi
v3.7.3
- Correction page blanche retour messagerie
v3.7.2
- Récapitulatif multiligne
- Lecture des messages vocaux dans l'appli
v3.7.1
- Factures pdf nécessite un lecteur pdf ex:Adobe Reader)
v3.7.0
- Meilleurs conversions numéros->contacts
- Montant du forfait(15.99 ou 19.99 au lieu de 0.00)
- Améliorations multiligne
v3.6.9
- Support du multiligne
- Correction factures vides
v3.6.8
- Ouverture sur messagerie
- Masquer les barres
- Facture même date
- Export csv des communications
v3.6.7
- Rappel messagerie
- Ajout num en 0033 et +33 (6)
v3.6.6
- Fix factures (changement du site)
- Fix force close
v3.6.5
- Thèmes sans barre titre
- Fix conversion numéros
v3.6.4
- Icône mobile thème noir
- Défilement détails thème noir
- Thème blanc details
- Conversion des numéros en +33
v3.6.3
- Tri des communications par type ou date
- Choix du thème noir ou blanc
v3.6.2
- Choix sens barres
- Caches messages et factures
- Conversion numéros en contacts
v3.6.1
- Hors ligne
- Fix 3 lignes coupées
v3.6.0
- Messagerie visuelle
- Design
v3.5.1
- Visualisation des factures
- Optimisations
v3.4.1
- Correction(FC)
v3.4.0
- Messagerie
- Corrections interface
v3.3.2
- Correction détails (Ok)
v3.3.1
- Correction détails
- Chargement différé du détails
v3.3.0
- Détails communications
v3.2.1
- Factures
v3.1.0
- Consos inter
v3
- Sans clavier
- login facultatif
v2.2.1
- Barre data
v2.2.0
- MAJ prob ident.
v2.1.1
- Carac spéciaux
V2.1.0
- écrans
- Barre chargement
v2.0.2
- Modif clavier
v2.0.1
- Ajout titre compte
v2.0.0
- MAJ authentification
v1.5.0
- clavier virtuel
v1.4.0
- "Chargement"
- Icône
v1.3.4
- Comptes inactifs
v1.3.3
- MAJ
v1.3.2
- Préférences
- Dém rapide.
v1.3.1
- Modif compte
- Totaux
v1.3.0
- MAJ site
- Design
- Multi

Recent changes:
v4.2.0
- Thème Holo pour android>2.3
- Bug barres progression

v4.1.6
- Bug certificats android < 3.0

v4.1.5
- Nouveau certificat

v4.1.4
-CorrectionFC

v4.1.3
-CorrectionFC

v4.1.2
-Correction factures et conversion numéros en contacts

v4.1.1
-Correction FC

v4.1.0
-Retour de la 3G

v4.0.0
-Changement de nom et logo
Version 3G disponible

v3.8.0
- Correction compte secondaire inactif

v3.7.7
- Correction lecture messages vocaux
- Correction suppression messages vocaux

Torque Pro (OBD 2 & Car)

Sun, 07 Mar 2010 19:10:59 +0000

See what your car is doing in realtime, get OBD fault codes, car performance, sensor data and more!

Torque is a vehicle / car performance / diagnostics tool and scanner that uses an OBD II Bluetooth adapter to connect to your OBD2 engine management / ECU

Layout your own dashboard with the widgets / gauges you want!

It can use the GPS to provide tracker logs with OBD engine logging so you can see what you were doing at any point in time

It can also show and reset a DTC / CEL / fault code like a scantool. Helps you fix your car and helps keep repair costs down!

Torque also features:

* Dyno / Dynomometer and Horsepower/HP & Torque
* Can read Transmission Temperatures (vehicle dependant)
* 0-60 speed timings - more accurate than just using plain old GPS - see how fast your car is (or truck )
* CO2 emissions readout
* Customisable dashboard & profiles
* Video your journey using the Track Recorder plugin with onscreen OBDII data overlay - a black box for your car/truck!
* Automatically send GPS tagged tweets directly to twitter (for example if you are going on a road trip)
* Massive fault code database for lookup of fault codes from different manufacturers
* Theme support (choose from different themes to change the look of your dashboard)
* Send logging information to web or email CSV/KML for analysis via excel / openoffice reader
* Heads up display / HUD mode for night time driving
* Compass (GPS Based) that won't suffer magnetic interference
* GPS Speedometer/Tracking and realtime web upload capability - see what you were doing and your engine, at a point in time
* Turbo boost feature for vehicles that support MAP and MAF sensors (VW & Golf / Audi / Seat etc supported)
* Alarms and warnings (for example if your coolant temperature goes over 120C whilst driving) with voice/speech overlay
* Car dock support
* Graph data
* MPG
* Able to share screenshots to Facebook, Twitter, Google+, Email, etc
* AIDL API for third party apps, A simple Telnet interface for developers to talk to the adapter, and an OBD scanner.
* Works on tablet devices like the Motorola Xoom, Dell Streak, Samsung Galaxy Tab and Nook

Works on any vehicle that uses the OBD 2 standard (most vehicles built after 2000, but can work for vehicles as far back as 1996) if in doubt check with your manufacturer first or look for 'OBD2' on written on a big white label in your engine bay

Works on vehicles made by Ford, VW, GM/Vauxhall/Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Subaru, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge, Jeep, Pontiac and many more vehicle makes, European, US, Far East, etc. Some vehicle ECUs may support more/less features than others

The app needs a Bluetooth OBD2 adapter to work. The adapter is small and plugs into the diagnostics socket on the car which gives your phone access. You can find a list of adapters on: http://torque-bhp.com/wiki/Bluetooth_Adapters (Garmin EcoRoute HD adapters not supported)

If you buy one of the cheap china OBD2 ELM327 bluetooth adapters from ebay / amazon, then make sure you have a good returns policy with the seller

Some of the best reliable OBD2 / OBD adapters are the Scantool.net adapter, the OBDKey, and PLX Devices, OBDLink, Bluetooth, ELM327 and other adapters are supported - search on google for them

More features added every release - there are forums at http://torque-bhp.com/forums/ - if you want something added then let me know and I'll try to add it if it is possible! Vehicle ECUs vary in the amount of sensors supported

*PLEASE NOTE* Any reports of hanging or reboots after quitting the app is due to a bug in HTC devices and Galaxy Tab,this can be triggered by using the Pandora/Vlingo/Other BT apps. Disabling Pandoras new bluetooth settings fixes the problem, but HTC/Samsung need to release a fix.Please contact their support and request a fix,Thanks!

Changelog:
http://torque-bhp.com/forums/?wpforumaction=viewtopic&t=3.0

Recent changes:
*Tip:Turn on 'Faster Communication' in the OBD settings for faster read speeds!

* Fixes for problematic bluetooth drivers on some phones
* 60 to 130mph timer added

*If you are having connection problems with Cyanogen ROMs then update to the nightly builds as there is a bug in their BT drivers

*If your phone goes slow when Torque quits then you have bugged bluetooth drivers - enable the 'Hang fix for HTC/Samsung' in the settings (set it to 'Yes') to work around the issue

SVOX Italian Bianca Voice

Tue, 28 Sep 2010 13:37:47 +0000

Did you know that your mobile can speak Italian?

Have Bianca read aloud texts from your e-book, navigation, translation and other apps in an Italian female, high quality and natural-sounding voice powered by SVOX.

When combined with TTS-enabled apps, Bianca can:
- give directions, allowing you to keep your eyes on the road while you're driving
- read a notification containing the caller / sender's name, and read the content of an incoming call / sms / mms / email
- read aloud your favorite e-books or pdf documents
- help you learn Italian by reading aloud the correct pronunciation

and much more… the possibilities are limitless!
Browse http://svoxmobilevoices.wordpress.com for a list of compatible apps and voice demos.

NEW! Pronunciation correction feature: correct the default output according to your preferences!

== INSTRUCTIONS ==
1. Install and run the voice app once 
2. Install free SVOX Classic Text-to-Speech Engine 
3. Go to Android Settings -> Voice Input & Output -> Text-to-Speech settings.
Activate SvoxClassic at the bottom of the screen.
Select SvoxClassic as the Default Engine.
4. Run the voice app, click “Continue”, then follow the instructions.
5. Your SVOX Voice main screen will be now visible. Don’t forget to try the new pronunciations correction feature (‘pencil’ icon)!
6. Download other free / paid apps to combine our voice with. For example, you could try: Google Navigation (on Android 2.2 and later, only with Navigation < 5.9), Moon+ Reader PRO, Voice Actions Plus, TalkToMe Classic, Book Speech Audio Books, Transzilla, Good Morning, WakeVoice...
Browse http://svoxmobilevoices.wordpress.com/faq/ for a list of frequently asked questions.
And now … enjoy your new SVOX voice!

== PRONUNCIATION CORRECTION FEATURE - HOW TO ==
1. Run the voice app
2. Click on the ‘pencil’ icon. The pronunciation correction screen will now be shown.
3. Tap on the Android menu key and select ‘Help’

== NOTES == 
1. Google Navigation requires that the Text-to-Speech voice matches the phone language. You can change the phone language in Android Settings -> Language & keyboard -> Select language 
Compatible with Google Navigation version < 5.9
2. On Android 2.1 and earlier, only some apps, like Google Translation, support changing voices.

Recent changes:
- Resolved issue with the status bar notification that was always telling users to reinstall the application.

LiveView ContactCall Plugin

Fri, 03 Dec 2010 21:52:52 +0000

*** Sony Ericsson LiveView device is REQUIRED for proper work ***

This plugin lets you browse contacts and call selected one, using LV buttons:

- up/down - select contact (long press - fast browse)
- left/right - select phone (long press - change contacts group)
- select - start/cancel call
- power - clock mode / screen off

Please contact me if you have any problem. And try not to use contact groups if you have problem with contacts, it might help.
If you cannot see the plugin in the plugin's list, do restart your phone.
If you see the plugin twice in the plugin's list, do clear data of LiveView application.
If you cannot switch to clock mode or after plugin start you can see nothing but blank screen, you probably have an old firmware installed on your LV device. Please update it with Sony Ericsson Update Service.

Every donator is entitled to get an unlock key. The key will unlock exclusive features of all my LiveView plugins.

Extends:com.sonyericsson.extras.liveview.

Recent changes:
Ver. 1.44

- new: possibility to exclude unwanted contact groups
- new: data transfer optimization - when it's on, only changed screen areas are redrawn. The plugin may start working even more unpredictable if there are any connection issues. (for donators)

Ver. 1.45

- fixed: stupid FC bug, my fault, sorry

Ver. 1.46

- new: ability to show a phone type in contacts list (h - home, w - work, m - mobile). Symbols for primary numbers are uppercased.

RSS Smart Extras™

Mon, 23 Apr 2012 15:25:18 +0000

Stay in touch with the latest news and events using your SmartWatch or Smart Wireless Headset pro. With the RSS application you can add an RSS feed of your choice on your phone and get all the news as it happens.

This is the official RSS News application for Sony Smart Extras™.

Note: This application will not be shown on your phone application screen. Access application settings via LiveWare™ manager, where you can add and remove feeds, enable or disable this application, and select how to be notified, for example via vibration and sound on the phone.

LiveWare™ extension for SmartWatch

LiveWare™ extension for Smart Wireless Headset pro

Irssi ConnectBot

Sat, 03 Jul 2010 09:40:39 +0000

Irssi ConnectBot is modified version of the popular ConnectBot SSH client.

Irssi ConnectBot has features which helps users to use Irssi.

Features:
- Doubletap sends meta+a
- Left/Right swipe changes irc channel
- Long press opens popup menu with commands

Donate (Bitcoin): 12Xe9L8Kam2F838RipTstT1BAxWLZjWRxh

Twitter: http://www.twitter.com/irssiconnectbot

More info: http://bit.ly/gvLHg8
Comment answers: http://bit.ly/fLFeb9

IRC: #irssiconnectbot @ IRCNet

Recent changes:
SECURITY FIXES!

- Private keys are no longer backed up using Google's restore service. Generate new private keys if you don't trust Google! (Thanks to Pricey @ Freenode!)
- Bugsense removed