Bouncy Castle Safety Log

WHAT IT DOES
BounceLog is a private, offline-first safety-check log for inflatable and bouncy castle hire operators who do their own setup and handover.

- Record a wind-speed reading for every hire (mph + Beaufort)
- Record the internal pressure and the anchorage you used
- Run a pre-use check: blower, anchor points, ground type, fabric and seams, mats, electrical, deflation test, capacity and supervision
- Capture a signed handover sheet with the hirer
- Attach photos of anchorage and any damage
- Group hires by unit and keep your PIPA / ADiPS tag and annual-inspection date
- Export a PDF audit pack to share with your insurer or local authority
- Keep your own records on your own device

WHO IT'S FOR
- One-van and family inflatable / bouncy castle hire operators
- Operators in the UK, Ireland, Australia and New Zealand working to BS EN 14960 or AS 3533.4.1 and HSE guidance
- Sole traders who set up, check, and hand over the unit themselves

ABOUT YOUR RECORDS
Units, hires, checks and photos are stored on your device. BounceLog is a record-keeping tool. It is not a safety inspection, does not certify that any inflatable is safe to use, and does not replace the annual inspection by a competent person (PIPA / RPII / ADiPS). You are responsible for following the standards and guidance and for the accuracy of your records. Always check the manufacturer's operating manual.

Contact: support@clearstackapps.com

Recent changes:
A refreshed website offer, clearer chip labels in dark mode and small stability fixes.