EZViewer for KiCad

View your KiCad PCBs and schematics on your phone or tablet — no laptop needed.
The fastest way to check a design at the soldering bench, in a meeting or in the field.

■ Supported files
- Boards: .kicad_pcb (KiCad 4 – 10)
- Schematics: .kicad_sch (KiCad 6 – 10), including hierarchical sheets
- Footprints: .kicad_mod
- Zipped project folders — open the board and every sheet at once

■ Built for assembly and repair
- BOM & assembly mode (Pro): parts grouped by value and footprint. Pick a line to light up every location on the board, then check parts off as you place them. Progress is saved per board.
- Net highlight: long-press a pad or track to light up the whole net.
- Find parts & nets: search by reference, value, MPN or net name and jump straight to it.
- Tap info: tap a pad or part to see its reference, value, footprint, net and side.
- Bottom view: flip the board to see the bottom side the right way round.
- Cross-probing (Pro): jump from a symbol in the schematic to its footprint on the board, and back.

■ View & measure
- Toggle, recolor and solo individual layers
- Measure between pads, pins and vias in 7 units (mil, mm, inch …)
- Navigate hierarchical schematic sheets
- Light and dark canvas
- Share the current view as PNG

■ Free version and Pro
These are Pro features in the free version. 2-layer boards and schematics are fully viewable for free.
- Inner copper layers (In1.Cu and up) of 4-layer and larger boards
- BOM & assembly mode
- Cross-probing between schematic and board (switching views stays free)
- Measurement values are shown for the first 5 measurements.
- Sharing as PDF is a Pro feature (PNG sharing is free).
- A small Pro banner sits at the bottom of the screen.
A one-time in-app purchase (not a subscription) removes every limit and the banner, and can be restored on any device with the same Google account.

■ Fast and private
- Opens large boards of tens of megabytes in seconds.
- Works completely offline. Your files never leave your device.

Try it right away with the built-in sample project (board + 3-sheet hierarchical schematic). On the sample, BOM & assembly mode and cross-probing are free to try.

Contact: bestjunsoft@gmail.com

KiCad is a trademark of its respective owner. This app is an independent viewer and is not affiliated with, sponsored or endorsed by the KiCad project or the Linux Foundation.

Recent changes:
New version