Gas Tightness Test IGEM UP/1B

Gas tightness testing to IGEM/UP/1B Edition 4, for Gas Safe registered engineers. Follow the steps, enter your readings and get the result on the property.

WHAT IT DOES
- Let-by test, stabilisation and the 2 minute test, each with its own timer.
- Pass, isolate and re-test, or fail, as soon as you enter the pressure drop.
- Gas volume calculator: installation volume and permitted pressure drop.
- Gas rate calculator: m³/h and kW, gross and net.
- Purge volume, repeat test and leak detection fluid check.
- Reads the water U-gauge from a photo.

IMPORT A DIGITAL GAUGE RESULT
- Tap Import a gauge result, then paste the readings from your electronic gauge app.
- The let-by, stabilisation and tightness readings fill in. You add the job and volume.

VIDEO TUTORIALS
- Short videos on every step: flueprint.app/igem

THE RECORD
- Client and installation details, your logo and signatures.
- A PDF tightness test record with the results and the gauge photos.
- Saves on the phone and uploads when you have signal.

For Gas Safe registered engineers and their apprentices. Every new account is checked against the Gas Safe Register. Free for now.

An aid only. You remain responsible for testing to IGEM/UP/1B and for the decision to pass or fail.

Recent changes:
First release: IGEM/UP/1B Edition 4 tightness test, U-gauge photo reader, gas rate calculator.