IPv6Config (root required)
Downloads
Missed IPv6 connectivity on world IPv6 day? With this app you can use IPv6 now!
Similar apps
AppBrain's verdict
Removed- Rating on Google Play
- 3.93
- 195 ratings
- Installs
- 71 thousand
- Last updated
- August 29, 2011
- Ads
- Contains ads
- Size
- 63.9 KB
IPv6Config (root required) is no longer on Google Play. It was there for 7 years, until August 2018. It had 71 thousand installs. Users were divided: 3.9 stars from 195 ratings.
User feedback
Ratings and reviews on Google PlayComments on IPv6Config (root required) for Android
Google Play Rating history and histogram
The year before it was removed from Google Play, up to August 2018
Store listing
By Rene Mayrhofer, from Google PlayDescription by Rene Mayrhofer Written by the developer, not by AppBrain. Click to read.
With IPv6 as the next Internet Protocol, the default behavior on current Android systems is to derive IPv6 addresses from a so-called prefix that is automatically announced (broadcast) in a network that has been IPv6-enabled and the so-called suffix that includes the MAC address of the network card.
Including the MAC address in this automatically generated IPv6 addressing scheme means that, independently of the network a specific device connects to, the last 64 Bits of its IPv6 address will always remain the same. Even when moving between different networks, each device using this scheme is therefore uniquely identifieable by its suffix. This allows to easily track devices as they connect to different networks and whenever they use any network resources.
When enabled, the RFC4941 extensions cause a device to generate dynamic IPv6 address with random suffixes and change these addresses randomly. This prevents tracking a device, as it is unlikely that it will use the same address again (and if so, then only by chance). This android application can be set to start at device bootup and automatically set the appropriate Linux kernel configuration option on all known network interfaces (WiFi and GPRS/UMTS, mostly) so that they will use randomly generated addresses instead of those derived from the device MAC address.
In addition to enabling privacy, this application also allows to configure so-called 6to4 tunnels based on a single IPv4 address the device holds (e.g. the UMTS/GPRS/EDGE assigned IPv4 address). This allows using IPv6 even when your Internet provider does not yet support it.
This application has been tested successfully on:
* Google Nexus S GT-i9023 with Android 2.3.3 (rooted with Clockwork Recovery 3.0.0.0-crespo, then busybox installed with Busybox Installer app)
* HTC Desire with Android 2.2 (unrevoked)
* HTC Desire HD with Android 2.3 (Visionary+ r14)
* Samsung Galaxy S2 rooted with modified kernel (flashed with Odin)
* Motorola Milestone with Cyanogenmod 7 rc3
IPv6Config will not currently work on:
* Motorola Milestone with stock Android 2.1 (ip binary missing)
* Samsung Galaxy Tab GT-P1000 (z4root) because the Samsung kernel has not been compiled with IPv6 address privacy extensions. (busybox also doesn't link to the ip binary, but that could be worked around by calling "busybox ip" instead of "ip".)
Full source code of this application can be downloaded from https://gitorious.org/android-ipv6config under the terms of the GNU General Public License version 3. If you wish to support development of this and other Android applications for network protocol support and security and privacy, consider buying the donate version of IPv6Config.
Recent changes:
Enhancements: This version will react to changes in network connectivity and try to re-establish the 6to4 tunnel automatically. A new expert option allows to ignore the address sanity checks and force creation of a tunnel. Additionally, the user interface is more responsive.
Bugfixes v2.2: This version fixes a few error cases on a small number of devices caused by different interface names and ip binary locations. It now works on a (rooted) Samsung Galaxy S2. Further sanity checks for devices.
Safety and technology
Found in the app by AppBrain- Ads
- Contains ads
- Price
- Free
- Libraries
- 0
- App size
- 63.9 KB
- Needs Android
- 1.5+
- Content rating
- Everyone
Technologies used by IPv6Config (root required)
Releases
Updates seen on Google Play- Version
- 2.2
- Launched
- April 2011
- Aug 19, 2018Unpublished
- Jan 13, 2015Installs50,000+ installs
- Aug 29, 2011UpdateVersion 2.2
- Jul 1, 2011UpdateVersion 2.1a
- Jun 26, 2011UpdateVersion 2.1
Installs
Tracked by AppBrain- Play install range
- 50+ thousand
- Launched
- April 2011
About the app and developer
About IPv6Config (root required)
IPv6Config (root required) was a communication app developed by Rene Mayrhofer. It was removed from Google Play Aug 19, 2018.
Install Statistics
IPv6Config (root required) had been installed 71 thousand times before it became unavailable.
User Ratings
IPv6Config (root required) was rated 3.93 out of 5 stars, based on 200 ratings.
App Information
IPv6Config (root required) was free. The app size was 63.93 kB. The last available version was 2.2. The last update was on August 29, 2011.
Technical Requirements
IPv6Config (root required) required Android 1.5+ or higher. The app had a content rating of Everyone. The app had been available on Google Play since April 2011.
IPv6Config (root required) was made and published by Rene Mayrhofer. AppBrain is an independent app data site and isn't affiliated with Rene Mayrhofer. The app name, icon and description belong to Rene Mayrhofer and are shown as last published on Google Play.
App Performance Report
Get a detailed PDF report for IPv6Config (root required) with download trends, rating history, and key performance statistics — useful for competitive research or tracking your own app. Learn more
Get PDF Report — $29Developer information for Rene Mayrhofer
Share IPv6Config (root required)
Subscribe now to get full and unlimited access to AppBrain Intelligence. You'll have access to:
- App Intelligence dashboard (performance timeline, competitor comparison, country rankings, insight cards)
- Detailed ranking data per app
- Full timeline per developer
- Device market shares data per country
- Unlimited keyword tracking
- AI assistant access via MCP (Claude, Cursor or any MCP client)
AppBrain is an app data site, we track rankings, ratings, installs for all apps and games on Google Play and the App Store. AppBrain doesn't host app files or APKs, all install links go directly to the official store. All trademarks are owned by their respective owners.
More apps
App statistics