IR Remote Tester: Button Check is a tools app developed by Global Utility App Maker.
Download Statistics
IR Remote Tester: Button Check has been downloaded 55 times. In the last 30 days, the app was downloaded 55 times.
User Ratings
The app has no ratings yet.
App Information
IR Remote Tester: Button Check is freely available from Google Play. The APK size is 64.01 MB. The latest APK version available is 1.0.0. The last update was on October 28, 2026.
Technical Requirements
The app has a content rating of Everyone. The APK has been available on Google Play since October 2026.
IR Remote Tester: Button Check is made and published by
Global Utility App Maker.
AppBrain is an independent app data site and isn't affiliated with Global Utility App Maker.
The app name, icon, screenshots and description belong to Global Utility App Maker and are shown as published on Google Play.
Description by Global Utility App Maker(from Google Play)
IR Remote Tester checks whether your TV, air-conditioner or set-top box remote still sends its infrared signal, and points to the likely cause when it doesn't: the remote, the batteries or the TV. Hold the remote's tip in front of the phone camera and press when asked. The app spots the invisible flash by itself, counts it and gives a verdict with a confidence level and next steps.
▶ AUTOMATIC FLASH CHECK AND VERDICT • No staring at the screen: the app compares camera frames and counts the remote's infrared flash in each press. • A guided test of about 15 seconds: hold a button, then tap it quickly, twice. • Verdicts include: remote is sending · batteries or contacts suspected · remote fault likely · button contacts suspected · check the TV side · likely not an infrared remote · can't judge with this camera yet. • Each verdict shows high, medium or low confidence and the reasons behind it, for example "Flash caught in 2 of 3 presses". • You're asked just what the verdict still needs: new batteries? Does the TV react? Does the AC remote's display work? • If the detector isn't sure, you check the live preview with your own eyes, and the result is labelled "Confirmed by eye".
▶ TEST EVERY BUTTON • A button grid for your remote type: TV (14 buttons), air conditioner (7), set-top box (12), streaming remote (4). • Tap a button, then press it on the remote 3 times: works ✓, sometimes ~ or no signal ✗. • Buttons that fail while the rest work point to worn or dirty contacts. A cleaning guide is included. • While a diagnosis is open, the button results update its verdict.
▶ A CAMERA CHECK YOU CAN TRUST • Many back cameras filter infrared. The app remembers which camera has actually seen infrared and suggests the front camera. • If a camera has never seen infrared, a missing flash is reported as "can't judge with this camera yet", never as a broken remote. • Exposure changes and hand movement are not counted as flashes. Flicker in the room lowers the confidence. • Signal strip per frame, beep and vibration on each flash (both switchable), adjustable detection threshold.
▶ PHONE IR BLASTER • Shows whether this phone has a built-in IR blaster and the carrier frequencies it reports. • On phones with a blaster: pick the TV brand (five code sets), send power, volume + or mute and tell the app whether the TV reacted. If it did, the TV's receiver works, and your answer is added to the verdict. • No blaster found? The app explains why: many recent phones have none, and plug-in IR adapters are not reported by the phone.
▶ MORE HELP • Battery check (type, + and −, corrosion) and a TV-side checklist. • Compare two remotes at the same distance: a rough relative brightness, not a strength reading. • Share a result as an image. The last 50 results are kept, each with an optional remote name.
▶ GOOD TO KNOW • A phone camera takes a few frames per second: it sees that a flash happened, but can't tell which code was sent or how strong it is. • Verdicts are likelihoods with a confidence level, not certainties. • Bluetooth and radio remotes send no infrared. Many streaming remotes use infrared just for TV power and volume. • Blaster codes may not match every model of a brand, and other brands aren't covered yet. • Camera frames are analysed on the phone and deleted right away. Nothing is recorded or uploaded, and results stay on this phone unless you share them. • Ads stay off the screen while the camera is checking a remote or the blaster is sending.
Recent changes: Diagnose watches the remote's tip through the camera, spots the infrared flash and names a likely cause with a confidence level. On the Buttons tab, press a key 3 times to see Works, Sometimes or No signal. Phone IR looks for a built-in IR blaster on this phone.
Get a detailed PDF report for IR Remote Tester: Button Check with download trends, rating history,
and key performance statistics — useful for competitive research or tracking your own app.
Learn more
Are you the developer of this app? Join us for free to see more information about your app and learn how we can help you promote and earn money with your app.
Each subscription will automatically renew 3 days before the expiration date for
the same time period. Subscriptions can be cancelled at any time before the renewal.