* This app needs an adapter cable and a bluetooth OBD2 adapter to work * - more information here: https://sites.google.com/view/scanmytesla/reccommended-adapters
Now supports Model 3!
Scan My Tesla reads information from the diagnostics port of your Tesla Model S, 3, or X, to present visually, or log for later analysis.
This app gives you numerous live statistics such as:
- Battery power / voltage / current / temperatures
- Drive Unit electric power / torque / horsepower / RPM / temperatures
- Battery lifetime stats, capacity estimates and mileage
- 12V system current, voltage, temperature
- Trip recording and statistics, including regenerated and charged energy
Needs an ELM327 or STN1110 compatible OBD2 bluetooth adapter + OBD2->Tesla Diagnostic port cable. (There are at least 2 different plugs depending on your model year)
OBDLink MX bluetooth, or other high quality, STN1100 based adapter that supports the ST command set is highly reccommended.
BLE / Bluetooth Low Energy adapters are not supported.
Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)
Model 3 decoding community led by JWardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Contains elements of Android OS example code adhering to Apache 2.0 license
Go here for more information:
https://sites.google.com/view/scanmytesla/
Facebook page:
https://www.facebook.com/scanmytesla/
Model 3 specific information
https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Disclaimer
This software is not affiliated with Tesla Motors
Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works.
The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.
Emon's Craftmanshipping assumes no responsibility for errors or omissions in the contents on the Service.
In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.
This Disclaimer is licensed by TermsFeed Generator.
Recent changes:
Battery amp offset auto-detection, to support new firmware on 200 kw charge enabled cars
Added 'cell temp mid' for model 3
* This app needs an adapter cable and a bluetooth OBD2 adapter to work * - more information here: https://sites.google.com/view/scanmytesla/reccommended-adapters
Now supports Model 3!
Scan My Tesla reads information from the diagnostics port of your Tesla Model S, 3, or X, to present visually, or log for later analysis.
This app gives you numerous live statistics such as:
- Battery power / voltage / current / temperatures
- Drive Unit electric power / torque / horsepower / RPM / temperatures
- Battery lifetime stats, capacity estimates and mileage
- 12V system current, voltage, temperature
- Trip recording and statistics, including regenerated and charged energy
Needs an ELM327 or STN1110 compatible OBD2 bluetooth adapter + OBD2->Tesla Diagnostic port cable. (There are at least 2 different plugs depending on your model year)
OBDLink MX bluetooth, or other high quality, STN1100 based adapter that supports the ST command set is highly reccommended.
BLE / Bluetooth Low Energy adapters are not supported.
Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)
Model 3 decoding community led by JWardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Contains elements of Android OS example code adhering to Apache 2.0 license
Go here for more information:
https://sites.google.com/view/scanmytesla/
Facebook page:
https://www.facebook.com/scanmytesla/
Model 3 specific information
https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/
Disclaimer
This software is not affiliated with Tesla Motors
Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works.
The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.
Emon's Craftmanshipping assumes no responsibility for errors or omissions in the contents on the Service.
In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.
This Disclaimer is licensed by TermsFeed Generator.
Recent changes:
Battery amp offset auto-detection, to support new firmware on 200 kw charge enabled cars
Added 'cell temp mid' for model 3
Show full description
Hide full description
