Truebend: Conduit Bending

Find your conduit bend marks before you pick up the bender. Enter field measurements, choose your bender and conduit, and check the result in a live diagram.

CORE BENDS INCLUDED
• 90-degree stub-up: calculate the arrow mark from the end for your stub height and selected bender. Total cut length needs the other leg measurement.
• Two-point offset: enter rise, first mark and bend angle to calculate spacing, both marks and shrink.
• Three-point saddle: lay out the center and side marks around an obstruction.

Choose angle presets or adjust the angle a degree at a time. Read fractional-inch marks at your chosen precision, save your usual bender, size and material, and share bend values with a coworker. Calculations work offline and require no account.

OPTIONAL PRO UNLOCK
A one-time in-app purchase adds seven advanced bends:
• Back-to-back 90s
• Four-point saddle
• Kick / compound 90
• Rolling offset
• Parallel offset
• Concentric parallel runs
• Segmented sweeps

Pro also includes Degree Level, with zero and Hold/Live controls, and Square Align for working from a compass reference. Restore Purchases recovers an existing Pro purchase on the same store account.

CHECK YOUR BENDER AND THE JOB
Use the bender, conduit material and trade size that match your work. Available shoe data varies by bender. Gain-based figures are estimates. Always verify marks and dimensions against your bender, applicable code and site conditions.

Built by 509 Electric in Yakima, Washington, for electricians and apprentices working in the field.

Recent changes:
Improved Pro purchase and restore reliability. Prices now load directly from Google Play, and Pro access updates after confirmed purchases and when you return to the app.