Simulating engine ECU on 3 different OBD2 standard as CAN 11, ISO 9141 and J1850
About WiFi ENGINE ECU
WiFi ENGINE ECU is a tools app developed by CHINH LUONG QUOC.
Download Statistics
WiFi ENGINE ECU has been downloaded 38 times. In the last 30 days, the app was downloaded 0 times.
User Ratings
The app has no ratings yet.
App Information
WiFi ENGINE ECU costs $3.49 to download. The APK download size is 3.42 MB. The latest version available is 3.2.8. The last update was on May 22, 2026.
Technical Requirements
The app has a content rating of Everyone. The app has been available on Google Play June 2018.
Description
WiFi Engine ECU - Version 3.2.8
Parameters * IP address: the host address of device emulates ECU (as server).This address can NOT be changed because it is assigned be the Network. So the tester (as client) must set it IP address to this address to connect to * Port : the port to make connection, this port number can be changed via settings(also can be changed on tester app side)
Usage Run "WiFi engin ECU" first to get the Host IP Address and Port number Modify IP address and port on "app tester" to these IP and port.
Press button "Start", the data like DTCs and VIN that are visible only on a dialog screen (menu Edit) can be modified All other invisible data will be returned with fixed values.
Wait some seconds (ECU gets stable) then start launching tester on other device.
This app converts an Android device (phone or tablet) become a car ECU with WiFi connection This is convenient and cost-effective solution for android OBDII software developing and testing
Hardware Use 2 android devices, the one runs this app (as wifi server - SIM ECU) and the other runs an android OBDII app for testing (as client - tester)
Using this app you don't need a real car, stay indoor and do all testing before doing with a real car The ECU Engine Simulation can affirm is running stable and reliable
The apps have been tested * OBD-II Code Reader Pro * Torque Pro * DashCommand
The ECU Engine Simulation can also work well with command line on android WiFi terminal apps
The ECU Engine Simulation works like a data server, so it waits (listen) for data request (AT or OBD-II commands) from external tester, then processing and responds to the request
The ECU Engine Simulation emulates 3 OBD-II protocols: 1 - ISO 15765-4 CAN 11/500Kb 2 - ISO 9141-2 (5 Baud init) 3 - SAE J1850 PWM (41.6 Kbaud)
Setting Menu: select OBD protocol The app can process most AT commands, but the following AT commands are usually used: * ATZ, ATWS, ATSP0, AT@1, ATI, ATH0, ATH1, ATE0, ATE1, ATDP, ATRV, ATDPn, ATSPn, ATTPn, ATCAF0, ATCAF1, ATSP6, ATAT0
OBD-II commands supported by this app 1. Supported PIDs requests: 01 00 : pid 0x01 to pid 0x20 01 20 : pid 0x21 to pid 0x3F 2. Live data PIDs: 01 01, 01 04, 01 05, 01 0A, 01 0C, 01 0D, 01 0E, 01 10, 01 11, 01 03, 01 04, 01 05, 01 21, 01 33, 01 46, 01 5C, 01 5E, 01 6A, 01 67 3. Vehile information: 09 00 - ask supported PIDs 09 02 - ask VIN number 09 04 - ask calibration number 4. DTC trouble codes: 03 - ask stored codes 07 - ask pending codes 0A - ask permanent codes 04 - ask clearing trouble codes and relevant stored data 5. Freeze frame data - frame #0 02 00 00 - supported PIDs 02 02 00 - DTC that cause freeze frame data to store 02 XX 00 - where XX are PIDs to request other freeze frame data
AT commands used by tester to init the simulated adapter ECU : ATZ - reset OBD-II adapter ATSP6 - set protocol ISO 15765-4 CAN 11/500Kb (may use ATSP0 or ATTP6) ATSP3 - set protocol ISO 9141-2 (5 Baud init) (may use ATSP0 or ATTP3) ATSP1 - set protocol SAE J1850 PWM (may use ATSP0 or ATTP1) ATH1 - to view the header (7E8) in the response and ATH0 if not ATCAF1 - adapter to format data for you ATCAF0 - you have to format the request data yourself. in this case remember to add PCI byte (number of data bytes) at the first place in the request for example 02 01 0D : where 01 0D is request vehicle speed (2 data bytes) and PCI byte is 02
Init the OBD-II adapter with the above AT commands you can send what OBD-II request (or other AT commands) you want as usual
Support enhanced PIDs for testing with CAN 11 bit protocol Header & PID Ford 7E0: 221E1C/2209D4 760: 223A51 Prius Gen2 7E2: 21C3/21C4 7E3: 21CE Gen3 & PHV 7E0: 21C1 7E2: 21C2/217D/2181/2192 7B0: 2103/2142 7C0: 2113 Privacy policy https://www.freeprivacypolicy.com/live/27fa7a5d-cfab-4b42-8598-8be25a9e8b2f
Get a detailed PDF report for WiFi ENGINE ECU with download trends, rating history,
and key performance statistics — useful for competitive research or tracking your own app.
Learn more
Are you the developer of this app? Join us for free to see more information about your app and learn how we can help you promote and earn money with your app.
Each subscription will automatically renew 3 days before the expiration date for
the same time period. Subscriptions can be cancelled at any time before the renewal.
