AppBrain's verdict
- Last updated
- November 10, 2026
- Size
- 3.84 MB
User feedback
Ratings and reviews on the App StoreComments on Magedori: Conduit Bending Calc for iOS
We don't have enough comments to show example comments. Please check back later.
Store listing
By Daisuke Yamaguchi, from the App StoreDescription by Daisuke Yamaguchi Written by the developer, not by AppBrain. Click to read.
Make one test bend and the app learns how your bender actually bends. From then on, the numbers match the pipe.
CALIBRATE TO YOUR OWN BENDER
Benders of the same size bend differently with make, age, wear and the hand on the handle. Book values drift. Bend a 90° on a scrap piece, measure it once, and the app works out your real centerline radius for that size and keeps it.
EIGHT BENDS
• 90° stubs and any-angle bends
• Kicked 90°: marks for the 90° and the kick, distance between them, shrink along the run
• Offsets with distance between marks and shrink
• Rolling offsets (new in 1.5): enter the rise and the roll, get the true offset, how far to roll the pipe, and both marks
• 3-point saddles
• 4-point saddles
• Single bends at any angle
• Parallel runs: how far to shift each mark
MARKS FROM THE PIPE END, IN ORDER
Results are a list of distances measured from the end of the pipe: ① bend start ② bend end ③ cut. Lay your tape along it and mark. Choose whether you measure to the back, the center or the inside, and the red line in the drawing moves to show you.
TOLD WHY IT WON'T BEND, AND WHAT WILL
If two arcs would overlap, the app says so, says by how much, and offers an angle that works. One tap switches to it.
EMT, IMC AND RIGID, IN INCHES
All ten trade sizes from 1/2" to 4" for EMT, IMC and RMC, with fractions to 1/16". Metric steel conduit (EN 61386) and Japanese JIS conduit are included too, in millimeters.
NEC RADIUS CHECK
Warns when the centerline radius falls below NEC Chapter 9 Table 2.
BUILT FOR THE JOB SITE
• No sliders. Type numbers on the keypad or tap +/- steps
• Every feature works underground or with no signal
• What you enter never leaves your device. To improve the app, only anonymous usage data (such as which screens are opened) is counted with Google Analytics (you can turn this off in Settings).
• No ads, no in-app purchases. One-time purchase, everything included
• Save calculations to history
Results are a guide. Final dimensions and code compliance are the responsibility of qualified personnel following local rules and your AHJ.
Requires iOS 17 or later. iPhone and iPad.
Safety and technology
Found in the app by AppBrain- Price
- $1.00
- App size
- 3.84 MB
- Content rating
- Everyone
Technologies used by Magedori: Conduit Bending Calc
Releases
Updates seen on the App Store- Version
- 1.5
- Launched
- August 2026
No changelog data
Alternatives
Similar apps and more from Daisuke YamaguchiMore from Daisuke Yamaguchi
Rankings
App Store top charts- Highest rank
- #46
- Chart
- Top Paid
- Productivity
- Country
- France
About the app and developer
About Magedori: Conduit Bending Calc
Magedori: Conduit Bending Calc is a productivity app developed by Daisuke Yamaguchi.
User Ratings
The app has no ratings yet.
App Information
Magedori: Conduit Bending Calc costs $1.00. The app size is 3.84 MB. The latest version available is 1.5. The last update was on November 10, 2026.
Technical Requirements
The app has a content rating of Everyone. The app has been available on the App Store since August 2026.
Magedori: Conduit Bending Calc is made and published by Daisuke Yamaguchi. AppBrain is an independent app data site and isn't affiliated with Daisuke Yamaguchi. The app name, icon, screenshots and description belong to Daisuke Yamaguchi and are shown as published on the App Store.
Developer information for Daisuke Yamaguchi
Address:
Frequently asked questions about Magedori: Conduit Bending Calc
Is Magedori: Conduit Bending Calc free?
No. Magedori: Conduit Bending Calc costs $1.00 on the App Store.
Is Magedori: Conduit Bending Calc still available?
Yes. Magedori: Conduit Bending Calc is on the App Store, and the last update we saw was on November 10, 2026.
How large is Magedori: Conduit Bending Calc?
Magedori: Conduit Bending Calc is 3.84 MB.
Is Magedori: Conduit Bending Calc suitable for children?
App Store rates the content of Magedori: Conduit Bending Calc as suitable for everyone.
Who made Magedori: Conduit Bending Calc?
Magedori: Conduit Bending Calc was developed by Daisuke Yamaguchi. It is listed in the productivity category on the App Store.
Share Magedori: Conduit Bending Calc
Subscribe now to get full and unlimited access to AppBrain Intelligence. You'll have access to:
- App Intelligence dashboard (performance timeline, competitor comparison, country rankings, insight cards)
- Detailed ranking data per app
- Full timeline per developer
- Device market shares data per country
- Unlimited keyword tracking
AppBrain is an app data site, we track rankings, ratings, installs for all apps and games on Google Play and the App Store. AppBrain doesn't host app files or APKs, all install links go directly to the official store. All trademarks are owned by their respective owners.
More apps
App statistics
About AppBrain