AppBrain's verdict
- Last updated
- November 15, 2026
- Size
- 1.95 MB
User feedback
Ratings and reviews on the App StoreComments on RackMaker for iOS
We don't have enough comments to show example comments. Please check back later.
Store listing
By Tad Cox, from the App StoreDescription by Tad Cox Written by the developer, not by AppBrain. Click to read.
RACK CHARTS
Enter a rack once and get the marks for every conduit, staggered so parallel offsets, kicks and 90s keep their spacing through the bend. Mix conduit sizes, space by center to center or by gap, see the total rack width, and check it against the space you have to fit in. The chart warns you when conduits would touch or run into each other in the bend.
EVERY COMMON BEND
90° stubs, offsets, rolling offsets, kicks and kicked 90s, 3-point saddles (10-20-10, 15-30-15, 22½-45-22½ and 30-60-30), 4-point saddles, back-to-back 90s, two 45s around something in a corner, and segmented and concentric bends.
RUN BUILDER
Put several bends on one stick. Get every mark measured from one end, the cut length, and the order to bend them in. Hold and drag a bend to change the order.
DRAWINGS YOU CAN READ
Every bend shows the finished shape with its bends numbered, and the straight conduit with each mark and a bender under it, so you can see which way the hook faces and whether the arrow, notch or star goes on the mark. Zoom in on any drawing.
ANGLE LEVEL
Hold your phone on the bender handle and it reads the angle as you pull. It ticks through the last few degrees, then beeps and buzzes when you are on the angle.
MADE FOR THE JOB SITE
• Big keypad with fraction keys, so there are no decimals to type
• Inches, feet and inches, or centimeters, rounded to 1/8, 1/16 or 1/32
• Handbook multipliers, or centerline radius math for bigger conduit and steeper bends
• EMT and Rigid/IMC from 1/2" to 4", with your own bender's deduct, gain and radius
• Share any bend as text or a PDF, or print it
• Works with no signal. Nothing you enter leaves your phone. No account, no ads, no subscription.
Safety and technology
Found in the app by AppBrain- Price
- $4.99
- App size
- 1.95 MB
- Content rating
- Everyone
Technologies used by RackMaker
Releases
Updates seen on the App Store- Version
- 1.0
- Launched
- November 2026
No changelog data
Rankings
App Store top chartsApp Store Rankings for RackMaker
About the app and developer
About RackMaker
RackMaker is a productivity app developed by Tad Cox.
What is the rating of RackMaker?
RackMaker has no ratings yet.
Is RackMaker free?
RackMaker costs $4.99. The app size is 1.95 MB. The latest version available is 1.0. The last update was on November 15, 2026.
What are the requirements for RackMaker?
The app has a content rating of Everyone. The app has been available on the App Store since November 2026.
RackMaker is made and published by Tad Cox. AppBrain is an independent app data site and isn't affiliated with Tad Cox. The app name, icon, screenshots and description belong to Tad Cox and are shown as published on the App Store.
Developer information for Tad Cox
Address:
Share RackMaker
Subscribe now to get full and unlimited access to AppBrain Intelligence. You'll have access to:
- App Intelligence dashboard (performance timeline, competitor comparison, country rankings, insight cards)
- Detailed ranking data per app
- Full timeline per developer
- Device market shares data per country
- Unlimited keyword tracking
AppBrain is an app data site, we track rankings, ratings, installs for all apps and games on Google Play and the App Store. AppBrain doesn't host app files or APKs, all install links go directly to the official store. All trademarks are owned by their respective owners.
More apps
App statistics
About AppBrain