AppBrain's verdict
- Rating on App Store
- 3.83
- 6 ratings
- Last updated
- October 31, 2026
- Size
- 20.5 MB
It doesn't have enough ratings yet to judge what users think.
User feedback
Ratings and reviews on the App StoreComments on Stud Finder App: Wall Scanner for iOS
We don't have enough comments to show example comments. Please check back later.
Store listing
By Ebenezer Oteng, from the App StoreDescription by Ebenezer Oteng Written by the developer, not by AppBrain. Click to read.
Stud Finder turns your iPhone's built-in magnetometer into a magnetic stud finder. It picks up the steel nails and screws that hold drywall to the studs, and warns you about the pipes, rebar and conduit you don't want to hit.
Lay your phone flat on the wall, let it calibrate, then slide it slowly. The gauge climbs as you get closer to metal, and the scanner lights up, beeps and buzzes when it finds something.
THREE SCAN MODES
Stud Mode: Tuned for the small, brief signal of a nail or screw. Follow the line of fasteners to find the stud.
Metal Mode: Less sensitive, so only larger metal like pipes, plates and steel studs stands out. A line of nails won't set it off, so you can tell a fastener from a pipe.
Deep Scan (Pro): The most sensitive mode, for fasteners set deeper in the wall that Stud Mode can pass right over.
WALL VIEW (PRO)
Found one stud? Point your camera at the wall and Wall View draws a line on it in AR, then marks where the next studs should be at your stud spacing: 16 or 24 inches, or 40 or 60 cm. Slide your phone onto a predicted line to check it, and tap to confirm.
Predicted lines are estimates. Doubled studs around doors, windows and corners can break the pattern, so check each one with the scanner before you drill.
FEATURES
• Calibrates against your own wall, so readings fit the room
• Live field strength in microtesla (µT) or milligauss (mG)
• Low, normal and high sensitivity
• Haptic and sound alerts: one beep for a possible stud, three for metal
• Save scans and look back at them later
• Keep the screen awake while you scan
• A step-by-step guide that walks you through hanging a shelf, from the first stud to the last screw
• Available in 13 languages
FREE AND PRO
Stud Mode, Metal Mode and calibration are free. The free plan includes 3 scans of up to a minute each. After that, watch a short ad for another scan, as often as you like. You can keep up to 5 saved scans.
Stud Finder Pro adds:
• Deep Scan
• Wall View
• Unlimited scans with no time limit and no ads
• Unlimited saved scans
If your plan starts with a free trial, we'll remind you two days before it ends.
HOW IT WORKS, AND WHAT IT CAN'T DO
We want you to know exactly what you're getting.
Your phone's magnetometer senses magnetic fields, so it detects ferrous metal: steel nails, screws, pipes, rebar and conduit. Wood isn't magnetic, and no phone can detect it directly. Stud Finder finds studs the way a magnetic stud finder does, by finding the metal fasteners holding them in place.
That's why the app reports what it finds by signal strength instead of claiming to identify materials. If a reading in Stud Mode is unusually strong, it tells you it's likely metal rather than a stud.
Results depend on your device's magnetometer, the wall material and how deep the metal is. Detection is less reliable through thick plaster, tile, concrete or metal lath. Always check before you drill, and never rely on any app alone where there may be electrical wiring or plumbing.
SUBSCRIPTIONS
Payment is charged to your Apple ID when you confirm your purchase. Subscriptions renew automatically unless cancelled at least 24 hours before the end of the current period. You can manage or cancel them in your App Store account settings.
PRIVACY
Your saved scans are stored on your device.
Privacy Policy: https://redizeuz.com/privacy
Terms of Use: https://redizeuz.com/terms
Safety and technology
Found in the app by AppBrain- Price
- Free
- App size
- 20.5 MB
- Content rating
- Everyone
Technologies used by Stud Finder App: Wall Scanner
Releases
Updates seen on the App Store- Version
- 1.1
- Launched
- August 2026
No changelog data
Alternatives
Similar apps and more from Ebenezer OtengAlternatives to Stud Finder App: Wall Scanner
More from Ebenezer Oteng
Rankings
App Store top chartsApp Store Rankings for Stud Finder App: Wall Scanner
About the app and developer
About Stud Finder App: Wall Scanner
Stud Finder App: Wall Scanner is an utilities app developed by Ebenezer Oteng.
User Ratings
Stud Finder App: Wall Scanner is rated 3.83 out of 5 stars. The rating is based on 6 ratings.
App Information
Stud Finder App: Wall Scanner is freely available from the App Store. The app size is 20.46 MB. The latest version available is 1.1. The last update was on October 31, 2026.
Technical Requirements
The app has a content rating of Everyone. The app has been available on the App Store since August 2026.
Stud Finder App: Wall Scanner is made and published by Ebenezer Oteng. AppBrain is an independent app data site and isn't affiliated with Ebenezer Oteng. The app name, icon, screenshots and description belong to Ebenezer Oteng and are shown as published on the App Store.
Developer information for Ebenezer Oteng
Address:
Share Stud Finder App: Wall Scanner
Subscribe now to get full and unlimited access to AppBrain Intelligence. You'll have access to:
- App Intelligence dashboard (performance timeline, competitor comparison, country rankings, insight cards)
- Detailed ranking data per app
- Full timeline per developer
- Device market shares data per country
- Unlimited keyword tracking
- AI assistant access via MCP (Claude, Cursor or any MCP client)
AppBrain is an app data site, we track rankings, ratings, installs for all apps and games on Google Play and the App Store. AppBrain doesn't host app files or APKs, all install links go directly to the official store. All trademarks are owned by their respective owners.
More apps
App statistics