0.00
0 reviews
Free
Screenshots by RF Guru, from the the App Store listing
AppBrain's verdict
- Last updated
- July 9, 2026
- Size
- 21.4 MB
User feedback
Ratings and reviews on the App StoreComments on SVXLink-HotSpot for iOS
We don't have enough comments to show example comments. Please check back later.
Store listing
By RF Guru, from the App StoreDescription by RF Guru Written by the developer, not by AppBrain. Click to read.
Control your RF.Guru hotspot over Bluetooth, watch the live feed, send DTMF, and explore the live reflector map from iPhone or iPad.
HotSpot is the official mobile companion for the Analog HotSpot SVXLink platform. Pair once over Bluetooth Low Energy and the app takes over from there: read live SVXLink state, switch talkgroups, send DTMF, watch the reflector network on a real map, and keep an eye on your 4G uplink.
What you can do:
• Live state feed — callsign, frequency, current talkgroup, active and last talker, TX/RX flags, plus 4G signal bars when an LTE modem is fitted.
• DTMF & device commands — full DTMF keypad with quick buttons (status, parrot, IP-announce) and a control menu for SVXLink start / stop / restart, 4G on / off, reboot and power-off.
• Talkgroup quick-dial — buttons highlighted yellow for the talkgroups your hotspot is actively monitoring, grey for switchable ones, with a green "last heard X ago" timer on each when the live feed is on.
• CTCSS info — output tone and the full input-CTCSS → talkgroup mapping shown on the Hotspot Info screen.
• Live reflector map — OpenStreetMap-based view of every node on your reflector. Spiderfy clustering, colour-coded pins (red transmitting, green ON0 repeaters, orange nodes, blue AI-detected, grey offline), floating callsign labels on active talkers, and a glass info card on every pin tap.
• Home radius — saves your QTH from GPS and frames the map at a configurable radius (default 150 km). One-tap re-center.
• Reflector talker history — live, server-paged list of who's been on the network, sourced from the same WebSocket feed.
• Auto-everything — auto-connect to your last hotspot on launch, auto-detect WSS support per reflector domain, auto-fetch the talkgroup labels from the portal, and fall back to Bluetooth-only mode when there's no internet.
• Keep-screen-on with auto-sleep — optional, slider from 0 (never sleep) to 120 min.
• Just Works pairing — no PIN, no fuss.
Open-source hotspot firmware: github.com/Guru-RF/Analog-HotSPOT-SVXLink
HotSpot is the official mobile companion for the Analog HotSpot SVXLink platform. Pair once over Bluetooth Low Energy and the app takes over from there: read live SVXLink state, switch talkgroups, send DTMF, watch the reflector network on a real map, and keep an eye on your 4G uplink.
What you can do:
• Live state feed — callsign, frequency, current talkgroup, active and last talker, TX/RX flags, plus 4G signal bars when an LTE modem is fitted.
• DTMF & device commands — full DTMF keypad with quick buttons (status, parrot, IP-announce) and a control menu for SVXLink start / stop / restart, 4G on / off, reboot and power-off.
• Talkgroup quick-dial — buttons highlighted yellow for the talkgroups your hotspot is actively monitoring, grey for switchable ones, with a green "last heard X ago" timer on each when the live feed is on.
• CTCSS info — output tone and the full input-CTCSS → talkgroup mapping shown on the Hotspot Info screen.
• Live reflector map — OpenStreetMap-based view of every node on your reflector. Spiderfy clustering, colour-coded pins (red transmitting, green ON0 repeaters, orange nodes, blue AI-detected, grey offline), floating callsign labels on active talkers, and a glass info card on every pin tap.
• Home radius — saves your QTH from GPS and frames the map at a configurable radius (default 150 km). One-tap re-center.
• Reflector talker history — live, server-paged list of who's been on the network, sourced from the same WebSocket feed.
• Auto-everything — auto-connect to your last hotspot on launch, auto-detect WSS support per reflector domain, auto-fetch the talkgroup labels from the portal, and fall back to Bluetooth-only mode when there's no internet.
• Keep-screen-on with auto-sleep — optional, slider from 0 (never sleep) to 120 min.
• Just Works pairing — no PIN, no fuss.
Open-source hotspot firmware: github.com/Guru-RF/Analog-HotSPOT-SVXLink
Safety and technology
Found in the app by AppBrain- Price
- Free
- App size
- 21.4 MB
- Content rating
- Everyone
Technologies used by SVXLink-HotSpot
Releases
Updates seen on the App Store- Version
- 1.7
- Launched
- June 2026
No changelog data
Alternatives
Similar apps and more from RF GuruAlternatives to SVXLink-HotSpot
More from RF Guru
Rankings
App Store top chartsApp Store Rankings for SVXLink-HotSpot
This app is not ranked
About the app and developer
About SVXLink-HotSpot
SVXLink-HotSpot is an utilities app developed by RF Guru.
What is the rating of SVXLink-HotSpot?
SVXLink-HotSpot has no ratings yet.
Is SVXLink-HotSpot free?
SVXLink-HotSpot is free. The app size is 21.39 MB. The latest version available is 1.7. The last update was on July 9, 2026.
What are the requirements for SVXLink-HotSpot?
The app has a content rating of Everyone. The app has been available on the App Store since June 2026.
SVXLink-HotSpot is made and published by RF Guru. AppBrain is an independent app data site and isn't affiliated with RF Guru. The app name, icon, screenshots and description belong to RF Guru and are shown as published on the App Store.
Developer information for RF Guru
Address: