W-Modbus is made and published by
LumenRadio AB.
AppBrain is an independent app data site and isn't affiliated with LumenRadio AB.
The app name, icon, screenshots and description belong to LumenRadio AB and are shown as
published on the App Store.
About W-Modbus
W-Modbus is an utilities app developed by LumenRadio AB.
What is the rating of W-Modbus?
W-Modbus has no ratings yet.
Is W-Modbus free?
W-Modbus is free. The app size is 44.99 MB. The latest version available is 1.2.2. The last update was on June 12, 2026.
What are the requirements for W-Modbus?
The app has a content rating of Everyone. The app has been available on the App Store since December 2023.
Description by LumenRadio AB(from the App Store)
The W-Modbus app has arrived! Upgrade firmware for LumenRadio W-Modbus devices by connecting to and upgrading the LumenRadio Gateway in the network through the app. In the Network map you will find a system overview where you can see signal strength, edit names of wireless nodes as well as seeing the health of the RS485 bus including which Modbus RTU address that is connected to that wireless node.
You can also connect to any node in the network and change their name (up to 20 characters).
The W-Modbus app requires W-Modbus firmware 3.1.1 and above, which can be downloaded from the LumenRadio support webpage. Note that you need to install FW 3.1.1 or above on the gateway from the nRF connect app to enable the functionality. It is also required to have at least 3.0.0 or above on all nodes in the network. You will need to update all nodes individually if they are on version 2.2.3. This will be the last time this is required. All future updates can be done by either this app or from the nRF connect app.
Each subscription will automatically renew 3 days before the expiration date for
the same time period. Subscriptions can be cancelled at any time before the renewal.
