Wifi Rig CTRL

WifiRigCTRL is an iPhone / iPad app for remotely operating your amateur-radio transceiver via a Raspberry Pi or ICOM CI-V (Wi-Fi / Bluetooth).

Features:
- Real-time RX frequency, mode and S-meter display
- Change frequency, mode, power, squelch and filter width
- RX audio playback through the speaker (with noise reduction)
- PTT on/off and microphone transmit
- CW Morse send and receive-decode (BLE / USB-NCM keyers)
- RTTY AFSK transmit/receive (on-device software modem or via the Raspberry Pi's minimodem, with spectrum display)
- FT8 / FT4 receive-decode and transmit
- Automatic FT8 all-decode log to ~/ALL.TXT (WSJT-X compatible)
- Band Scope (CAT single-sweep / native ICOM CI-V scope, with POTA/SOTA spots overlaid)
- APRS beacon transmit (GPS)
- QSO log (ADIF export, POTA/SOTA references)
- Operating-location (JCC/JGC, grid) registration and operating sessions
- eQSL auto-upload, Smart Ham Log integration, PSKReporter spotting
- Band memory, POTA/SOTA spot integration (SP2ALART)
- Multiple profiles, API-key auth, WireGuard VPN
- Direct Wi-Fi / Bluetooth CI-V to Icom IC-705 / IC-9700
- One-tap Raspberry Pi SSH setup

■ Requirements (Important)
This app does not work on its own. You need one of the following, owned by you:

A Raspberry Pi Zero 2W that is already set up (connected to your radio, with Hamlib/FastAPI installed), or
An IC-705 or IC-9700 (for a direct CI-V connection)
Connect either one to the same Wi-Fi network as your iPhone.
Setup instructions and firmware for the Raspberry Pi are available on GitHub:
https://github.com/ji1ore/M5CoreHamCAT
■ Intended Users
This app is for licensed amateur radio operators who have a compatible radio setup.

*This app contains no ads and no usage tracking. All data it collects is used only on your device and is never sent to an external server.