CamberPro: Wheel Camber Gauge

CamberPro turns your phone into a wheel camber gauge - measure the camber angle of any wheel, check it against a target spec, and know instantly if it's in or out.

1. Why CamberPro reads different from a bubble app
Most phone angle apps show you a raw, jittery number that changes every time you place the phone. CamberPro fixes that with two techniques borrowed from real hardware gauges:
• 180° flip calibration - measure once, flip the phone 180° on the same spot, measure again. The app cancels out your phone's sensor offset automatically and stores it, so every reading after that is calibrated.
• Stabilization window capture - the app watches your reading settle over ~1.5 seconds and only locks in a value once it's stable. No more locking in a number while your hand is still moving.

2. Built for a full 4-wheel session
Work through FL → FR → RL → RR with a top-down progress board that shows each corner's status at a glance, color-coded against your spec (in tolerance / out of tolerance). See cross camber (left vs. right difference) instantly - a quick way to spot uneven suspension setup.

3. Vehicle profiles with target specs
Save a profile per car with front and rear target camber angles and your own tolerance (±0.2° / ±0.3° / ±0.5°). Every capture is judged against that spec automatically - no more doing the math yourself.

4. What you get
• Analog dial gauge + digital readout, motorsport-instrument styling
• 180° flip calibration to remove sensor offset
• Stabilization-window capture (locks a settled average, not a jittery instant value)
• 4-wheel session board (FL/FR/RL/RR) with pass/fail against target spec
• Cross camber (left−right) at a glance
• Unlimited vehicle profiles (Pro) with front/rear target camber + tolerance
• Session history saved per vehicle
• Dark and light instrument themes
• Works on phones and tablets
• 8 languages

5. Private by design
No account, no upload - everything stays on your phone.

Unlock unlimited vehicle profiles with a single one-time purchase, forever.

Note: CamberPro measures camber angle only. It does not measure toe or caster and is not a substitute for a professional alignment rack. Readings are estimates from your phone's built-in sensors intended as a DIY reference aid - always verify critical alignment work with a qualified shop.

Recent changes:
Initial release.