Partometer3D - camera measure

Partometer3D is camera measure app for area, perimeter, length and distance, height and width, ratio, circle parameters (radius, diameter), angles measurements. It can be used as a camera ruler or tape measure for accurate measurements on pictures and photos. This camera measure app allows user to make measurements in any defined direction and plane in 3D space.

The measurement plane / object plane don't have to be parallel to the camera plane.
It expands number of situations where application can be used. For example, big objects now can be measured by taking a picture from a side, objects and distances that are difficult to reach can be measured as well.

Partometer3D has the same application area as "Partometer - camera measure", but gives you more flexibility and power. Angle Mode can be used for roof angle measurements. This data can be used in SolarMeter app for solar energy calculations.
It has following important and distinctive features:

- measure in any selected plane in 3D space
- Length, Angle, Area, Circle Modes
- add/delete any number of measurement/ruler lines
- values assigned to each ruler line
- measure objects in different directions
- save and share you measurement
- find object ratios, if you do not need absolute measurements
- compare object parts to each other
- use custom and predefined reference objects
- automatic reference object fine alignment using image processing
- reset reference object alignment by LONG TOUCH on auto alignment button

Partometer3D uses a phone/tablet camera and any available object with known size as a reference to perform measurement. To define the measurement plane a rectangular object (sheet of paper, credit card, custom object) is used. Image processing is used for automatic fine alignment with the reference object.

The App shows measurement results in different units: meters, millimeters, centimeters, feet, inches based on user settings. It also calculate dimensions of the object in relative units with respect to the reference object (ROL).

There is an option to make a picture and work with the still image instead of live camera view. Picture Load feature is also implemented to work with any picture from your photo gallery. Zoom View feature helps to align object boundaries accurately.

"Partomter3D - camera measure" can be very useful if you need to measure bigger distances on the plane, where the simple ruler or tape is difficult to apply.

More about measurements with camera and camera measure apps on our blog: http://goo.gl/amCVTD
Measurement guide: http://goo.gl/V8L88P

Recent changes:
3.2 - Circle Mode
3.1.3 - yard units, use screen outside ZOOM VIEW for fine ruler adjustment
3.1.1 - sharing and saving fix for KitKat 4.4, better pic upload - Picasa, Drive, browsers
3.1 - Area mode add points, Auxiliary Plane Grid
Quick access to Units, Plane and ROL settings
Delete selected point in area mode
3.0.1 - reset reference object alignment (LONG TOUCH in auto align button)
3 - Angle, Area Modes
2 automatic object alignment
1.1 Touch to switch points under control.