MELRemo(Administrator)

MELRemo allows you to connect your smartphone or tablet PC to air-conditioner remote controllers through Bluetooth and make initial settings for the remote controllers.

Features
・Easier initial settings for the remote controller with MELRemo
・Initial settings of a remote controller can be copied to other remote controllers.
・A company logo or an image can be sent to the remote controller to be displayed.

Supported functions
-Energy-save settings
-Timer settings
-Initial settings
-Clock settings
-Logo image transmission
-Copying settings data

Note
*Administrator password is required to connect your smartphone or tablet PC to the remote controller. Password can be found on the remote controller.
*Maintenance password is required to use certain functions.
*Before operating the air conditioner from your smartphone or tablet PC, make sure the operation will not adversely affect its surroundings or the occupants.
*Signal transmission error may occur in some environments or if you are too far away from the remote controller. Bringing your smartphone or tablet PC closer to the remote controller may solve the problem.
*MELRemo may not be properly displayed on some smartphones and tablet PCs.
*MELRemo does not work with Mitsubishi Electric’s RAC units.
*Since the function is upgraded from MELRemo 4.0.0, iOS less than 11 are not supported.
Please use this application with iOS 11 or later.
In addition, please do not update MELRemo if you are already using MELRemo less than 4.0.0 with iOS less than 11.
*Since the function is upgraded from MELRemo 4.6.0, iOS less than 12 are not supported.
Please use this application with iOS 12 or later.
In addition, please do not update MELRemo if you are already using MELRemo less than 4.6.0 with iOS less than 12.
*Since the function is upgraded from MELRemo 4.7.0, iOS less than 15 are not supported.
Please use this application with iOS 15 or later.
In addition, please do not update MELRemo if you are already using MELRemo less than 4.7.0 with iOS less than 15.

*MELRemo works with the following Mitsubishi Electric’s remote controllers with Bluetooth.

[Compatible remote controllers]
As of April 24th, 2026
■PAR-4*MA series
・PAR-40MA
・PAR-41MA(-PS)
・PAR-42MA(-PS)
・PAR-43MA(-P/-PS/-PF)
・PAR-44MA(-P/-PS/-PF)
・PAR-45MA(-P/-PS/-PF)
・PAR-46MA(-P/-PS/-PF)
・PAR-47MA(-P/-PS/-PF)
・PAR-48MA(-P)
■PAR-4*MA-SE series
・PAR-45MA-SE(-PF)
・PAR-47MA-SE(-PF)
■PAR-4*MAAC series
・PAR-40MAAC
・PAR-40MAAT
■PAC-SF0*CR series
・PAC-SF01CR(-P)
・PAC-SF02CR(-P)
■PAR-CT0*MA series
・PAR-CT01MAA(-PB/-SB)
・PAR-CT01MAR(-PB/-SB)
・PAR-CT01MAU-SB
・TAR-CT01MAU-SB
・PAR-CT01MAC-PB
・PAR-CT01MAT-PB

[Compatible devices]
MELRemo has been verified to work with the following devices.

iPhoneXR (iOS17)
iPhoneSE (iOS18)
iPhone13 (iOS26)

*The Bluetooth® word mark is a trademark owned by Bluetooth SIG, Inc., and Mitsubishi Electric Corporation has been authorized to use these trademarks.
*The iPhone is a trademark of Apple Inc., registered in the United States and other countries. The iPhone trademark is used under license from Aiphone Co., Ltd.
*The iOS trademark is used under license from Cisco Systems, Inc. in the United States and other countries.