AppBrain's verdict
- Last updated
- October 13, 2026
- Size
- 36.5 MB
User feedback
Ratings and reviews on the App StoreComments on Rough-In for iOS
We don't have enough comments to show example comments. Please check back later.
Store listing
By Brent Toon, from the App StoreDescription by Brent Toon Written by the developer, not by AppBrain. Click to read.
Every free electrical app hands you Table 310.16 and wishes you luck. Rough-In asks what you know — off the nameplate, off the print — and gives you back the sized answer.
ELEVEN NEC CALCULATORS AND SEVEN FIELD TOOLS
• Motor circuit — horsepower, voltage, phase and motor type in. Out comes the conductor, the branch-circuit device sized for the device type you are actually installing, and the maximum overload setting. It keeps table full-load current and nameplate FLA straight, and tells you which one it used where, because 430.32 is about your motor's plate and nothing else.
• Conduit bending — pick your bender. Ideal, Klein, Greenlee, each with the take-up its maker publishes, cited to the document it came from. Stubs, offsets, kicks, rolling offsets and saddles come back as marks measured from the end of the pipe, with the shrink already accounted for. If your bender's maker publishes nothing, the app says so and asks for the number off your tool instead of quietly guessing.
• Conduit fill — count your hots, neutrals and grounds. Get the raceway size, the fill percentage, and how much room is left: "room for 6 more #12 THHN". Or work it the other way: here is my pipe, what fits?
• Wire sizing — amps in, wire size out, with the derating chain and the termination temperature limit applied and explained.
• Voltage drop — size for a target percentage, or check a size you have already pulled. It tells you when voltage drop rather than ampacity is what set the size.
• Box fill — devices, clamps, grounds and pigtails counted by the rules that actually apply, with the allowance ledger shown line by line.
• Pull boxes — from 4 AWG up a box is not sized by counting wires at all. Enter the raceways coming in and where their conductors go, and get the minimum length, width and depth, each with the rule that set it and the rule that came second. Straight pulls, angle pulls, U pulls, splices and multiple rows of entries on a wall.
Plus dwelling load, circuit loading, grounding and bonding, burial depth, and a tool kit: a bend protractor that reads the pipe, Ohm's law and power, temperature, panel phasing, plugs and receptacles, Ethernet colors, and volume and area.
EVERY ANSWER SHOWS ITS WORK
Tap any result for the step-by-step math, each step with the code section it rests on. Every screen echoes the assumptions it used — 75°C terminations, 30°C ambient, THHN — and every one of them is changeable in Settings and visible in the answer. Nothing is hidden behind a default.
A REFERENCE SECTION THAT READS LIKE A PERSON WROTE IT
Original, plain-English explanations of the rules that trip people up, with worked examples, and a button straight into the calculator that does it.
WORKS WHERE YOU WORK
Every calculation runs on your phone. Basements, mechanical rooms, the back of a job trailer — no signal needed, because nothing here is looked up anywhere else. No ads. No analytics. Nothing you type leaves the device.
Rough-In is a one-time purchase, worked against the NEC 2023 edition. Buy it once — there is no subscription and nothing renews. The store is asked quietly when you have service, and losing service never locks you out of the tools.
Built and tested by members of IBEW Local 175
Reference and training tool. Check every answer against the equipment nameplate, the code edition adopted in your jurisdiction, your AHJ, and the manufacturer's installation instructions.
Safety and technology
Found in the app by AppBrain- Price
- Free
- App size
- 36.5 MB
- Content rating
- Everyone
Technologies used by Rough-In
Releases
Updates seen on the App Store- Version
- 1.0.0
- Launched
- October 2026
No changelog data
Alternatives
Similar apps and more from Brent ToonAlternatives to Rough-In
Rankings
App Store top chartsApp Store Rankings for Rough-In
About the app and developer
About Rough-In
Rough-In is an utilities app developed by Brent Toon.
User Ratings
The app has no ratings yet.
App Information
Rough-In is freely available from the App Store. The app size is 36.52 MB. The latest version available is 1.0.0. The last update was on October 13, 2026.
Technical Requirements
The app has a content rating of Everyone. The app has been available on the App Store since October 2026.
Rough-In is made and published by Brent Toon. AppBrain is an independent app data site and isn't affiliated with Brent Toon. The app name, icon, screenshots and description belong to Brent Toon and are shown as published on the App Store.
Developer information for Brent Toon
Address:
Share Rough-In
Subscribe now to get full and unlimited access to AppBrain Intelligence. You'll have access to:
- App Intelligence dashboard (performance timeline, competitor comparison, country rankings, insight cards)
- Detailed ranking data per app
- Full timeline per developer
- Device market shares data per country
- Unlimited keyword tracking
- AI assistant access via MCP (Claude, Cursor or any MCP client)
AppBrain is an app data site, we track rankings, ratings, installs for all apps and games on Google Play and the App Store. AppBrain doesn't host app files or APKs, all install links go directly to the official store. All trademarks are owned by their respective owners.
More apps
App statistics