Terex 3rd Eye Dashcam

Requires a compatible Terex 3rd Eye dashcam. Available features depend on the connected camera model and configuration.

The Terex 3rd Eye Dashcam app is the onboard companion to your 3rd Eye dashcam, helping installers and fleet managers verify installation, review recordings, and maintain camera performance.

Verify Camera Installation

A guided, step-by-step process helps installers confirm that the camera is installed correctly and ready for use:
1. Check power wiring for direct, three-wire installations.
2. Review live video to confirm proper camera placement and viewing angle.
3. Check that the camera firmware is up to date.
4. Verify LTE network connectivity.
5. Confirm auxiliary camera placement and video streaming.
Review, Extract, and Share Recorded Video

Fleet managers can connect to the camera to review historical footage stored on its SD card, extract relevant video segments, and share them from their smartphone. Filtering tools help identify risky events that need attention, reducing the time spent searching through hours of recordings.

Maintain, Troubleshoot, and Verify Camera Operation

A comprehensive set of diagnostic and maintenance tools helps users:
1. Check LTE network connectivity.
2. Verify power cable wiring.
3. Review SD card usage.
4. Configure the APN, where applicable.
5. Check vehicle battery voltage.
6. Submit camera logs for technical support.
7. Review the auxiliary camera video stream and configure its orientation.