5G LTE Antenna Alignment Pro

5G LTE Antenna Alignment Pro is a professional GPS-based antenna
alignment tool for cellular installations. It calculates true bearing
from your GPS position to the target tower — bypassing the magnetic
compass entirely. That's why it works where consumer compass apps
fail: on tower sites, rooftops with existing antennas, and anywhere
metal structures distort the magnetic field.

━━━━━━━━━━━━━━━━━━━━━━
THE PROBLEM WITH COMPASS APPS
━━━━━━━━━━━━━━━━━━━━━━
Your phone's magnetometer is a small, sensitive sensor. Put it near:
- A cellular tower with steel members
- A rooftop with existing panel antennas
- A vehicle, ladder, or steel mast
- Power lines or HVAC units
- Rebar in concrete

…and your compass reading can be off by 5°, 20°, or more. You point
your antenna based on that bad reading, and your alignment is wrong.

5G LTE Antenna Alignment Pro doesn't trust the magnetic field. It
uses GPS to compute true bearing from your exact position to the
target tower. No magnetic interference. No metal distortion. Just
the real angle, geodesically correct.

━━━━━━━━━━━━━━━━━━━━━━
HOW IT WORKS
━━━━━━━━━━━━━━━━━━━━━━
1. Your GPS locks your precise location.
2. Open the map and pick the target tower from known cell towers
in your area.
3. The app calculates the true bearing — the actual geodesic angle
from your position to the selected tower.
4. Align your antenna to that bearing.

The bearing is correct regardless of what's around you. Steel towers,
existing antennas, rooftops, vehicles — none of it affects GPS-based
true bearing.

━━━━━━━━━━━━━━━━━━━━━━
WHO USES IT
━━━━━━━━━━━━━━━━━━━━━━
- Professional cellular installers working on tower sites
- Rooftop installers aligning panel antennas next to existing arrays
- Microwave and point-to-point link installers
- WISP technicians on metal mast installations
- FWA / 5G home internet pros aligning Yagi or panel antennas
- RF engineers verifying antenna azimuth in field conditions
- Anyone working in environments where a compass cannot be trusted

━━━━━━━━━━━━━━━━━━━━━━
WHY IT'S CALLED PRO
━━━━━━━━━━━━━━━━━━━━━━
Most antenna apps work fine in your backyard. They fail at the tower
because that's where the magnetic environment is worst. This app is
built for the actual conditions professional installers work in:
metal-rich environments where every other compass-based tool gives
you a wrong answer with confidence.

━━━━━━━━━━━━━━━━━━━━━━
KEY FEATURES
━━━━━━━━━━━━━━━━━━━━━━
- GPS-based true bearing calculation
- Map view of known cell towers in your area
- Tap to select your target tower
- Geodesically accurate bearing
- Works in metallic environments where magnetic compasses fail
- Compatible with 5G, LTE, 3G, 2G networks

━━━━━━━━━━━━━━━━━━━━━━
PAIRS WITH 5G LTE CELL ANALYZER PRO
━━━━━━━━━━━━━━━━━━━━━━
Want full cellular signal analysis to verify your alignment? Check
out our companion app 5G LTE Cell Analyzer Pro for serving cell info,
neighbor cells, band identification, RSRP, RSRQ, SINR, and complete
cellular analytics.

Remove ads with a one-time in-app purchase. No subscriptions, no
recurring fees, no account required.

KEYWORDS: antenna alignment, GPS bearing, true bearing, antenna
pointing, antenna azimuth, tower alignment, cellular installer
tools, RF installer, 5G antenna alignment, LTE antenna alignment,
panel antenna, Yagi alignment, WISP tools, mast alignment,
professional antenna tools, cell tower map, geodesic bearing.

Recent changes:
What's New
📸 Camera Target Marking

Point camera at towers/antennas to lock alignment targets
Real-time tilt detection prevents compass errors
GPS-calculated bearings for maximum accuracy
Simple: Aim → Lock → Distance → Name → Align


Three Target Methods

📸 Camera mode
🗺️ Map selection
🗼 FCC tower database


Improvements

Fixed dialog visibility
Enhanced dual-needle compass
Better target management


v1.2.0 (Build 16) • April 2026